Sharp CV-P10LJ, CV-P13LJ Timer Operation, On Timer, Off Timer, E-20, Press the ON TIMER button

TIMER OPERATION

ON TIMER

1	Press the ON TIMER button.
	•	The time setting will change as you press the button
		as follows. Hold the button down to speed through the
		settings.
			0.5h	1.0h	1.5h	10h	11h	12h
	•	The orange TIMER lamp on the unit will light.
	•	The time setting will count down to show the remaining
		time.
	Select the mode, temperature, fan speed setting and
	PLASMACLUSTER operation as desired.
	• When the temperature is set with the ON TIMER, the
1
		temperature will show in the display for 5 seconds and
		then return to the time display.
	•	If you do not change the setting, the unit will operate us-
		ing the most recent setting.

CANCEL

TO CANCEL TIMER

Press the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

OFF TIMER

1

CANCEL

1Press the OFF TIMER button and set the time as desired.

•The time setting will change as you press the button as follows. Hold the button down to speed through the settings.

0.5h 1.0h 1.5h 10h 11h 12h

•The orange TIMER lamp on the unit will light.

•The time setting will count down to show the remain- ing time.

TO CANCEL TIMER

Press the CANCEL button.

• The orange TIMER lamp on the unit will turn off.

NOTES

•Timer duration can be set from a minimum of half an hour to a maximum of 12 hours.

Up to 9.5 hours, you can set in half-hour increments and from 10 to 12 hours, in 1-hour increments.

•The latest time setting will be memorized and will appear on the remote control display the next time you set the OFF TIMER or ON TIMER.

•The OFF TIMER and ON TIMER can not be set together. Only the most recent TIMER setting will be valid.

•If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be cancelled and will not be retrieved even after the power is restored.

E-20