Sharp CV-P13LJ, CV-P10LJ Pre-Operationchecks, E-13, LOADING BATTERIES Use two AAA R03 batteries

PRE-OPERATION CHECKS

LOADING BATTERIES Use two AAA (R03) batteries.

1 Remove the battery cover at the back of the remote control.

2 Insert batteries into the com- partment, making sure the ± and Ñ polarities are correctly aligned.

•Lines will appear on the display when batteries are properly in- stalled.

3 Reattach the battery cover.

4 Press the RESET button using a thin pointed implement.

Battery cover

NOTES:

•The battery should last approximately one year under normal use.

•When replacing the batteries, always change both batteries at the same time, and make sure they are the same type.

•If the remote control does not operate normally after replacing the batteries, press the RESET button using a thin pointed implement.

•If you will not be using the unit for a prolonged period, remove the batteries from the remote control.

E-13