Aegis Micro NRC 2.0.1 manual Change Administrator Password

Page 14

If this is the first time the NRC has been turned-on, once the NRC has completed its initial system boot-up process, the NRC system LCD graphics files will be uploaded into the LCD display. The NRC’s LCD display will indicate which LCD memory location the current image is being uploaded into and once this image upload process is finished, the LCD display will be activated and display 8 channel status windows above the status message “ www.aegis-inc.net” .1

7.Once the NRC has reached this stage, the user should then login to the NRC via the remote terminal.

Note: If you login before the NRC system has completed the LCD image file upload and the LCD display isn’t displaying the 8 channel status icons, the NRC file system will be in a read-only state. This will mean that none of the NRC configuration changes available through the NRC Configuration Utility will be able to changed.

8.Login as root, with the Aegis shipped root password set to aegisnrc. The option on how to change the password will be discussed shortly. Once logged in, the following NRC Configuration Utility will appear.

Networked Receiver Controller

Configuration Utility

(c)2005 Aegis, Inc.

1 ) Change administrator password

2 ) Configure network settings

3 ) Set time and date

4 ) Set NRC name

5 ) Configure NTP daemon

R ) Restart NRC

--------------------------------------------------------------

Selection:

Step 2: Change Administrator Password

It is important to change the root password immediately to secure the machine. Select option 1 and the follow the screen prompts to enter a new password. Below is a screen sequence example when the password is changed.

Change administrator password:

Do you really want to do this (y/N)? y

Changing password for root

Enter the new password (minimum of 5, maximum of 8 characters) Please use a combination of upper and lower case letters and numbers. Enter new password: Nrc-001

Re-enter new password: Nrc-001

password changed

Important: don’t forget or lose the root password. Doing so will make it impossible to administer these settings or to make any upgrades or changes to the NRC. In the case that this does occur, call Aegis, Inc. for recovery information.

1See “ Interpreting the LCD display” for details

Users’ Guide: Networked Receiver Controller - NRC-2.0.1

PAGE 14

11th October 2005

Copyright © 2005 Aegis, Inc

wwww.aegis-inc.net [ph. 240-568-9006]

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Networked Receiver Controller NRC-2.0.1 Proprietary Statement Table of Contents TEN-TEC RX-331 General Information Channel Architecture Audio Data CaptureUniversal Receiver Translation/Abstraction Receiver Controllable Settings Client Connection Options Capabilities SummarySpecifications System Hardware Supported ReceiversTh October Copyright 2005 Aegis, Inc Installation ContentsHardware Installation Connect to the NRC NRC ConfigurationPrerequisites Change Administrator Password Configure Network Settings Set the Time and DateConfigure the Network Time Daemon Optional Set the Host Name Restart the NRCUsers’ Guide Networked Receiver Controller NRC-2.0.1 Configure the NRC for Receivers Starting the NRC Using the NRCPower-On Self Test Post Interpreting the LCD DisplayUsers’ Guide Networked Receiver Controller NRC-2.0.1 Requirements Running the NRC Java Client Connect to NRC Server DialogTree Main Application WindowContent Panel NRC Servers NodeUsers’ Guide Networked Receiver Controller NRC-2.0.1 Channel Node Users’ Guide Networked Receiver Controller NRC-2.0.1 Users’ Guide Networked Receiver Controller NRC-2.0.1 Toolbar Status Bar Change Receiver Model Dialog Change Antenna Model Dialog NRC Properties Dialog Capture Channel Data Dialog DestinationOptions Signal Display Dialog Th October Copyright 2005 Aegis, Inc Appendix A- Receiver Configuration BAE Systems WJ-8723Appendix B Software Upgrades NRC File SystemUpdate Command Restore CommandClean Command Upgrade ProcedureUsers’ Guide Networked Receiver Controller NRC-2.0.1 Users’ Guide Networked Receiver Controller NRC-2.0.1
Top Page Image Contents