Aegis Micro NRC 2.0.1 manual Update Command, Restore Command

Page 39

UPDATE Command

If the UPDATE command file is present in code_changes directory during an NRC system bootup, a check will be made to see if there are valid NRC system files in update (CCPServer, RCPServer, CCPConfig.xml, RCPconfig.xml, DDPConfig.xml, LCDConfig.xml, Receivers.xml, WJ8723.xml and/or RX331.xml) and/or any “ .bmp” files in the update/lcd directory which need to be integrated into the NRC file system.

If valid system files are found in update at boot-up, the current existing NRC system files of the same name are moved into the code_changes/old directory and the new system files are moved into the appropriate NRC system directories.

If valid “ .bmp” files (LCD image files) are found in update/lcd, the current NRC directory of lcd files are copied from the NRC system into the old/lcd directory, and the lcd files in update/lcd are moved into the NRC system lcd directory.

Once this process is completed the UPDATE command file in code_changes will be replaced with an UPDATE_COMPLETE command file.

As the NRC system boots up these new files will now be part of the operational system.

RESTORE Command

The RESTORE command allows the NRC system to be rolled back to the original configuration in the advent that recently installed UPDATE changes need to be replaced.

If the RESTORE command file is present in code_changes directory during an NRC system bootup, a check will be made to see if there are valid NRC system files in old (CCPServer, RCPServer, CCPConfig.xml, RCPconfig.xml, DDPConfig.xml, LCDConfig.xml13, Receivers.xml, WJ8723.xml and/or RX331.xml) and/or any “ .bmp” files in the old/lcd directory which need to be re-integrated back into the NRC file system.

If valid system files are found in old, the current existing NRC system files of the same name are moved into the code_changes/update directory and the old system files are moved into the appropriate NRC system directories.

If valid “ .bmp” files are found in old/lcd, the current NRC directory of lcd files are copied from the NRC system into the update/lcd directory, and the lcd files in old/lcd are moved into the NRC system lcd directory.

Once this process is completed the RESTORE command file in code_changes will be replaced with an RESTORE_COMPLETE command file.

As the NRC system boots up these restored files will now be part of the operational system.

13For the lcd “ .bmp” files to be reloaded into the display, the corresponding LCDConfig.xml in old needs be edited to set the all the time fields to “ 0” .

Users’ Guide: Networked Receiver Controller - NRC-2.0.1

PAGE 39

11th October 2005

Copyright © 2005 Aegis, Inc

wwww.aegis-inc.net [ph. 240-568-9006]

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Networked Receiver Controller NRC-2.0.1 Proprietary Statement Table of Contents TEN-TEC RX-331 General Information Audio Data Capture Channel ArchitectureUniversal Receiver Translation/Abstraction Capabilities Summary Receiver Controllable Settings Client Connection OptionsSystem Hardware Supported Receivers SpecificationsTh October Copyright 2005 Aegis, Inc Contents InstallationHardware Installation NRC Configuration PrerequisitesConnect to the NRC Change Administrator Password Set the Time and Date Configure Network SettingsConfigure the Network Time Daemon Optional Restart the NRC Set the Host NameUsers’ Guide Networked Receiver Controller NRC-2.0.1 Configure the NRC for Receivers Interpreting the LCD Display Using the NRCPower-On Self Test Post Starting the NRCUsers’ Guide Networked Receiver Controller NRC-2.0.1 Connect to NRC Server Dialog Requirements Running the NRC Java ClientMain Application Window TreeNRC Servers Node Content PanelUsers’ Guide Networked Receiver Controller NRC-2.0.1 Channel Node Users’ Guide Networked Receiver Controller NRC-2.0.1 Users’ Guide Networked Receiver Controller NRC-2.0.1 Toolbar Status Bar Change Receiver Model Dialog Change Antenna Model Dialog NRC Properties Dialog Destination OptionsCapture Channel Data Dialog Signal Display Dialog Th October Copyright 2005 Aegis, Inc BAE Systems WJ-8723 Appendix A- Receiver ConfigurationNRC File System Appendix B Software UpgradesRestore Command Update CommandUpgrade Procedure Clean CommandUsers’ Guide Networked Receiver Controller NRC-2.0.1 Users’ Guide Networked Receiver Controller NRC-2.0.1
Top Page Image Contents