Aegis Micro NRC 2.0.1 manual Capabilities Summary

	Capabilities Summary
Receiver Controllable Settings		Client Connection Options
∙	Frequency	∙ Up to 64 simultaneous client connections
∙	Detection Mode	∙ Primary - connection to a receiver when it is free
∙	IF Bandwidth		o Full control and access to the receiver, the
∙	AGC mode		audio data and its configuration options.
∙	BFO	∙ Piggyback - connection to a receiver that already has a
∙	Reset / Reboot		Primary client attached
∙ Pass native commands to the receiver			o Limited connection privileges
	o By-pass the generic receiver		o No control of the receiver but visibility of the
			receiver’s settings.
	interface and send the receiver
			o Full access to the receiver’s audio
	proprietary commands
∙ Receiver Memory Interface Support			configuration and data options.
	o Save, recall and query receiver		o Can be promoted to Primary connection status
			if the existing Primary client disconnects
	configuration memory settings
Remote NRC System Monitoring		Digitized Audio Channel Output Options
∙ View current state of receiver configurations		∙	Sampling Rate:	8 KHz (default), 16 KHz
	and attached clients	∙	Filtering:	4 KHz LPF (default), None
∙ View health and well being of NRC		∙	Samples/Data Packet:	640 (default), 128-4096
		∙ Packet Time Stamping: None (default), TAI64N
		∙ Retune Samples skipped: 350 (default), variable
		∙	Collection Control:	Start / Stop
Receiver Channel POST		Network Time Protocol (NTP) Client
∙ A power on self test is used to verify each		∙ The NRC is configurable to obtain and synchronize
	receiver’s RS-232 control and audio signal		time with an NTP Server
	paths to reduce the possibility of incorrectly
	connecting receiver cables

Users’ Guide: Networked Receiver Controller - NRC-2.0.1 PAGE 8

11th October 2005 Copyright © 2005 Aegis, Inc wwww.aegis-inc.net [ph. 240-568-9006]