2U rack bezel option
The 2U rack bezel helps prevent any unauthorized physical access to the server in the rack configuration. To access the hard drive cage, you must unlock and open the 2U rack bezel.
To unlock the 2U rack bezel, use the key provided with the kit.
Install the 2U rack bezel into the chassis, and then lock the 2U rack bezel with the key.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/ productbulletin).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three sections:
1.Installing the Trusted Platform Module board.
2.Retaining the recovery key/password on page 72.
3.Enabling the Trusted Platform Module on page 72.
Enabling the TPM requires accessing RBSU (HP
TPM installation requires the use of drive encryption technology.
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
●Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system board.
●When installing or replacing hardware, HP service providers cannot enable the TPM or the encryption technology. For security reasons, only the customer can enable these features.
2U rack bezel option 69