HP VA-1809 manual Simple setup

6.Simple setup

6.1Setting the VA-1809's HDMI equipment performance using the internal program provided at the time of shipment

The performance of the VA-1809 can be changed using the internal program provided at the time of shipment. Select the number of the program to be set from the ones listed below, and load the program by following the steps below. To return the VA-1809 to the factory settings, refer to page ???.

6.1.1Loading the program

(1)Press the ANALYZE button. The key menu appears as shown below.

--------------------KEY MENU 表示------------------

DETAILS

INC

DEC

DIRECT NUM

F1

F2

F3

F4

(2) Press DIRECT NUM [F4] on the key menu.

--------------------リスト表示------------------

(3)From the list, select the program data to be loaded.

*The cursor is moved using the rotary key, and the selection is entered using the ENTER key.

*Select the program data based on the performance of the HDMI equipment from section 6.1.2.

(4)The program is now loaded.

*Program No.??? was loaded at the factory prior to shipment.

17