Config Setup, All | HP VA-1809 specs

(4)Setting the contrast of the LCD screen under normal conditions Set the contrast of the LCD screen under normal conditions.

→ [Rotary key] or [F1 or F2] to select the item whose value is to be changed →

[ENTER] to enter the selection

→[Rotary key] or [F1 or F2] to change the value → [ENTER] to enter the selection

Align the cursor with CONTRAST, and adjust the value. It can be changed to any value from -50 to +50.

7.3CONFIG SETUP

The VA-1809's unit settings are established using CONFIG SETUP. TOP → SETUP MENU[SETUP] → CONFIG SETUP[F2]

The menu is configured as shown below.

SETUP

CONFIG SETUP

Analysis Trigger

Video Timing

VA-1809 unit settings

Trigger settings for log execution

P. △△

AVI InfoFrame

SPD InfoFrame

Audio InfoFrame

MPEG InfoFrame

Channel Status Bit

Audio

ANALYSIS	Program Mode
HOTPLUG button execution mode	Program Group Mode
HOTPLUG button execution mode
P. △△
Speaker Volume	HOTPLUG button execution mode P. △△
HotPlug Mode	Manual Mode
Volume setting	Auto Mode
P. △△

7.3.1Setting the trigger for log execution

→ [F1 or F2] to select trigger item of ANALYSIS TRIGGER →

[ENTER] to enter selection or ??selection-to-be??

Set the trigger for capturing the log for log execution.

Align the cursor with the trigger for setting ANALYSIS TRIGGER, and change the ON/OFF status of the check button.