HP How the manual is configured, What is packed with the VA-1809

CAUTION

When connecting the VA-1809 to the display, connect the frame ground (FG) terminals on both units together by connecting the FG cable provided. If the FG terminals are not connected together, some extremely high-cost components (such as the output digital-to-analog converter) inside the VA-1809 may fail. Take special care with equipment in the process of development.

When disconnecting the VA-1809 from the display, first disconnect the connecting cable, and then disconnect the FG cable.

Always use the POWER switch on the rear panel to turn the power on and off. Turning the power on or off by connecting or disconnecting the power cable may destroy the PC card.

When accuracy is a high-priority consideration, leave the VA-1809 standing for 10 to 15 minutes with its power on, and use the VA-1809 after its operation has stabilized.

In the unlikely event that trouble or malfunctioning should occur, disconnect the power cable, and contact your dealer or an Astrodesign sales representative.

1.3How the manual is configured

This manual contains the instructions for operating the VA-1809. It is configured as shown below with sections devoted to operation, precautions and other aspects. Please read through the manual carefully to ensure that you will operate the generator correctly.

1.4What is packed with the VA-1809

The following items have been provided with this generator. Use only the items supplied for these parts since use of any other items may give rise to trouble.

■Standard items

•VA-1809

•VA-1809 instruction manual (what you are reading): 1 copy

•Compact Flash (CF) card (64MB): 1 pc

•CF card case: 1 pc

•Power cable: 1 unit (*1)

•FG cable (1.5 meters): 1 unit (*1)

*1: These cables are designed for used with the VA-1809 only.

•SP-1809

2