*To execute group data, the execution mode must be set to PROGRAM GROUP MODE. Refer to page ???.
*When executing group data, refer to ??? on page ???.
7.1.2Executing the program data (LOAD)
Execute the program data or group data created by following ??? on page ???.
*Either the program data is selected directly or the data in the groups is selected depending on the execution mode established by the
One method of executing the program data is to select ANALYZE EXE using the ANALYZE button from TOP, and another method is to select PROGRAM EXE using the PROGRAM button from TOP.
7.1.2.1 Executing the data from ANALYZE EXE
ANALYZE
F1
ERROR
TOPDETAILS
REPORT
F2
INC
F3
DEC
F4
DIRECT NUM
The program data can be ???executed??? during measurement by executing it from ANALYZE EXE.
TOP → ANALYZE EXE [ANALYZE]
(1)Using INC and DEC to execute the program data INC[F2] or DEC[F3]
INC is used to execute the data in the program whose number follows the number of the current program whereas DEC is used to execute the data in the program whose number precedes the number of the current program.
(2) Using DIRECT NUM to execute the program data
DIRECT NUM [F4] → [Rotary key] to select program data to be executed →
[ENTER] to execute the data
From the list, select the program data to be executed, and execute it.
22