HP manual Parts and their functions, 1 VA-1809 front panel

2.3Parts and their functions

The key functions differ depending on the unit's function and its mode. For details, refer to the descriptions of the operations outlined in each section.

2.3.1 VA-1809 front panel

2

3

4

5

6

7

	1
	10
	11
8	12
	13	15
9	14	16
	VA 1809	17

		Fig. Front panel
No	Button	Description of function
1	CF card slot	This is where the CF cards are inserted. Before removing a CF card, be
		absolutely sure to turn off the power.
2	LCD screen	The HDMI input images, analysis results, etc. are displayed on this
		screen.
3	ANALYZE button	Analysis is initiated by pressing this button.
4		When this button is pressed while the input status is being updated, the
	RUN/STOP button	status is stopped on the screen (LCD, VGA) output. When it is pressed
		again, the input status is updated.
5	PROGRAM button	The contents of programs can be edited by pressing this button.
6	SAVE	The settings or analysis results can be stored by pressing this key.
7	SETUP	Various settings can be performed by pressing this key.
8	F1, F2, F3, F4	Settings or programs can be selected by pressing these function buttons.
9	SHIFT	The functions of the function keys can be extended by pressing these
		keys together with the shift key.
10	HOTPLUG	The HotplugDetect signal can be changed by pressing this key.
11	LOG	A log of the input statuses can be displayed by pressing this key.
12	MENU	The menus can be turned on or off by pressing this key.
13	ENTER	Settings can be selected and entered by pressing this key.
14	ESC	Settings can be exited by pressing this key.

4