7.Detailed setup
7.1HDMI equipment performance settings
The performance of the HDMI receiver is stored in the EDID and HDCP registers and relayed when the data is read by the HDMI transmitter. By rewriting this data in the
The data can be registered as a program and stored on a CF card or as an internal pattern. This section describes the procedures from creating to executing the program data.
7.1.1Creating the program data
The program data creation screen is displayed when the PROGRAM button is pressed from TOP. The menu tree is as shown below.
| PROGRAM |
|
|
|
|
| PROGRAM | F1 |
|
|
|
TOP |
| COPY |
|
| |
EXE |
|
|
| ||
|
|
|
| Program copying | |
|
|
|
|
| |
| Program editing | F2 |
|
|
|
|
|
| List Edit |
|
|
|
|
|
|
| Group setting |
|
| F3 |
| F1 |
|
|
|
| Program Edit | EDID Edit | EDID editing |
|
|
|
| F2 |
|
|
|
|
| SINK Edit | SINK editing |
7.1.1.1Copying the program data
The procedure for creating the program data using existing program data is set forth below.
TOP → PROGRAMEXE[PROGRAM] → COPY[F1]
(1) Selecting the program data to serve as the basis for editing
[Rotary key] to move the cursor → [ENTER] to enter the selection
Move the cursor using the [Rotary key], and select the program data which will serve as the basis for editing. To enter the data, press ENTER.
19