8.8ISRC1 Packet
TOP → ANALYSIS [ANALYZE] ISRC1 Packet[F3]
→
DETAILS[F1]
→
more[SHIFT]
→
This operation sequence is used to decode ISRC1 Packet of the input and display it. For further details of the display, refer to the HDMI and DVD audio specifications.
8.9ISRC2 Packet
TOP → ANALYSIS [ANALYZE] ISRC2 Packet[F4]
→
DETAILS[F1]
→
more[SHIFT]
→
This operation sequence is used to decode ISRC2 [ACP???] Packet of the input and display it.
Refer to the HDMI specifications.
8.10Channel Status
TOP → ANALYSIS [ANALYZE] → more[SHIFT]→ Channel Status[F1]
DETAILS[F1]
→
more[SHIFT]
→
This operation sequence is used to decode the Channel Status Bit of the input HDMI audio stream and display it.
Refer to the IEC60958 specifications.
8.11Audio Timing
TOP → ANALYSIS [ANALYZE] → more[SHIFT]→ Audio Timing[F2]
DETAILS[F1]
→
more[SHIFT]
→
This operation sequence is used to display the constants (N, CTS) used to regenerate the Audio Clock of the input HDMI Audio and the volume level of the input HDMI Audio.
For details on the audio clock regeneration, refer to the HDMI specifications.
*The volume level can be displayed only when PCM sound is input.
32