HP VA-1809 manual Internal program data

Page 21

6.1.2Internal program data

From the performances listed below, select the data of the program selected in section 6.1.1.

Using the VA-1809 as a receiver → Program No.???

Using the VA-1809 as a repeater → Program No.???

Using the VA-1809 as a receiver that supports SD → Program No.???

Using the VA-1809 as a receiver that supports HD → Program No.???

Setting the audio reception performance of the VA-1809 to PCM/2 channels → Program No.???

Setting the audio reception performance of the VA-1809 to PCM/8 channels → Program No.???

*Even if 8-channel audio signals are supplied to the VA-1809, only the front 2 channels will be output.

*For details on EDIDs, refer to the appendix.

6.2Connecting the signal source, and displaying the HDMI input images on the LCD screen

After executing the steps in section 6.1, refer to "Example of connections when using the VA-1809 as a receiver" under "Connections with peripherals," and connect the DVD player or other signal source to the HDMI input connector of the VA-1809.

The images output from the DVD player appear on the LCD screen while its sound is output from the speaker.

18

Image 21

Contents Temporary/not complete February 9 Contents Config Setup Safety precautions Before operationForeword What is packed with the VA-1809 How the manual is configuredFeatures and main functions Concerning the VA-1809Introduction 1 VA-1809 front panel Parts and their functions2 VA-1809 rear panel 3 VA-1809 on-screen display Concerning the internal dataPage Usable CF cards Concerning CF cardsPoint Analyze Menu structureProgram TOP Copy EXE Program EXESetup Display Setup SetupSave Menu Save MenuConnections with peripherals Example of connections when using the VA-1809 as a monitorExample of connections when using the VA-1809 as a repeater Connections for isolating the Hdmi input sound for output Simple setup Internal program data Hdmi equipment performance settings Detailed setupSelecting the program data to be deleted Select the program data to be executed Using INC and DEC to execute the program data INCF2 or DECF3 Using INC and DEC to execute the program data TOP → Setup Menusetup → Display SETUPF1 LCD screen settingsALL Config SetupFollowing settings are available for the execution mode Details of the modes are given below How to display the measurement results Error ReportVideo Timing Video Timing Items displayed are listed below Fig. Vertical sync signal InfoFrame SPD InfoFrame AVIInfoFrame Audio InfoFrame MpegISRC2 Packet ISRC1 PacketChannel Status Audio TimingOther functions Error table Product specifications Terms