HP Brocade 4Gb SAN c-Class BladeSystem Using External Dhcp, Setting the IP address manually

Page 29

Using External DHCP

To set the Ethernet IP address using external DHCP:

1.Connect to the active OA via a web browser.

2.Document the DHCP-assigned address by selecting the switch from the OA GUI Rack Overview window.

3.Verify the IP address using a telnet or ssh login to the switch, or by selecting the switch in the OA GUI Rack Overview window.

Setting the IP address manually

IP addresses must be set manually for 4Gb SAN Switches with revision levels prior to rev 0C (running Fabric OS versions earlier than 5.2.1b). Switches with revision levels earlier than rev 0C do not support DHCP. Set IP addresses for these switches manually as follows:

NOTE:

As an alternate method to using a null modem cable, use telnet or ssh to access the IP address of the Onboard Administrator, resuming at step 9 below.

1.Obtain the following items to set the IP address via a serial connection:

•Computer with a terminal application (such as HyperTerminal in a Windows environment or TERM in a UNIX environment)

•Null modem serial cable

2.Replace the default IP address (if present) and related information with the information provided by your network administrator. By default, the IP address is set to 10.77.77.77 for switches with revision levels earlier than 0C.

3.Verify that the enclosure is powered on.

4.Identify the active OA in the BladeSystem.

5.Connect a Null modem serial cable from your computer to the serial port of the active OA.

Brocade 4Gb SAN Switch for HP c-Class BladeSystem

29

Image 29

Contents AA-RWEBB-TE Page Contents Post Managing the 4Gb SAN SwitchRegulatory compliance and safety How to prevent electrostatic discharge Grounding methods SAN Switch technical speciﬁcationsElectrostatic discharge Glossary IndexFigures Tables Page About this guide SAN Switch related documentationIntended audience HP c-Class BladeSystem related documentationHP contact information Before you contact HP Technical SupportConvention Element Document conventions and symbolsDocument conventions TIP Subscription serviceOther HP web sites Overview 4Gb SAN Switch features Component identiﬁcation Identify the physical components of the 4Gb SAN SwitchItem number Description Internal ports summary4Gb SAN Switch redundancy 4Gb SAN Switch licensing ISL trunking groups Supported optional featuresOptional hardware Accessory Part numberOptional hardware kits Shipping carton contents SetupIdentiﬁes 4Gb SAN switch components Installation and safety considerationsInstalling multiple switches Environmental considerations Electrical considerationsInstall the 4Gb SAN Switch Scale 2/3 = OA veriﬁes power Checking LEDs Verifying power-on LEDs Power-on LEDsUsing Enclosure Bay IP Addressing Ebipa Setting the IP addressSetting the IP address manually Using External DhcpConnect interconnect Items required for conﬁguration Conﬁgure the 4Gb SAN SwitchConnecting to the Command Line Interface Setting the date and time Example Verifying installed licensesEnter a unique domain ID. For example Modifying the FC domain ID optionalDisabling and enabling a port Disabling and enabling a switchDpod commands Using Dynamic Ports On Demand DpodExample for Brocade 4/12 SAN Switch Backing up the conﬁguration Verifying the conﬁguration40Setup Management features Managing the 4Gb SAN SwitchManagement tool Out-of-band support In-band support 4Gb SAN Switch management featuresInstalling dust covers in empty ports Maintaining the 4Gb SAN SwitchConnecting via a management station Replacing an SFP transceiverInstalling an SFP SFP components Diagnostic testsInterpreting LED activity Powering on and offDescription LED indicators Number LED indicatorsLED patterns System and power LED patterns are shown in TableModule status LED patterns Module Status LED patterns during normal operationPort link status LED patterns Port link status LED patternsPort link speed LED patterns Post and boot speciﬁcationsBoot Interpreting Post results Firmware update Rebooting the switch About the reset buttonReplacing a faulty 4Gb SAN Switch Save the conﬁguration ﬁle Regulatory compliance Regulatory compliance and safetyLaser device Regulatory compliance identiﬁcation numbersCanadian notice avis Canadien International notices and statementsBsmi notice European Union noticeJapanese notice Korean notices Battery replacement notice SafetyJapanese power cord statement Taiwan battery recycling noticePower cords Dutch notice Waste Electrical and Electronic Equipment directiveEnglish notice Estonian notice Czechoslovakian noticeFrench notice Finnish noticeGreek notice German noticeItalian notice Hungarian noticeLithuanian notice Latvian noticePortuguese notice Polish noticeSlovenian notice Slovakian noticeSwedish notice Spanish noticeElectrostatic discharge How to prevent electrostatic dischargeGrounding methods This appendix provides the following informationElectrostatic discharge SAN Switch technical speciﬁcations Speciﬁcation Description General speciﬁcationsGeneral speciﬁcations 4Gb SAN Switch physical dimensions Weight and physical dimensionsDimension Measurement Lists physical propertiesSupported SFPs Environmental requirementsSupported HBAs Environmental requirementsAlpa GlossaryAPI AwtovEdtov CRCDLS Flogi FciaFCP Fspf FRUFSP Lpsm LIPLmtov MIB LWLRatov PlogiRrtov RAIDRscn SANWWN SWL86Glossary ISL IndexTrunking groups LEDTransceiver, 14, 16, 31, 44, 47