HP Brocade 4Gb SAN c-Class BladeSystem manual Save the conﬁguration ﬁle

Page 54

NOTE:

If using the CLI, type switchDisable at the prompt. Refer to the Fabric OS command reference guide for additional command information.

10.Continue with the switch conﬁguration. Enter the appropriate information when prompted. Make sure that the data entered matches the settings on the faulty switch.

11. Install the same Fabric OS version as the faulty switch using the CLI command firmwareDownload, the integrated Web Tools GUI or the optional Fabric Manager GUI.

12.Verify that the appropriate licenses are installed on the replacement switch.

13.Save the switch conﬁguration ﬁle after making your edits, type: configupload

14.Restore the switch conﬁguration from the remote server using the backup conﬁguration ﬁle from step 1.

15.Enable the switch. Use the CLI command switchenable, the integrated Web Tools GUI or the optional Fabric Manager GUI.

16.Connect all external FC cables in the same port locations as before. To connect to the external switch ports without connectivity to external devices, the external switch port must be disabled prior to inserting the cable and then re‐enabled after inserting the cable to establish connectivity.

17.Verify that the switch is joined to the fabric and all connected devices log into the switch, type:

switchshow

18.Save the conﬁguration ﬁle.

IMPORTANT:

HP recommends upgrading all switches in the enclosure to the latest available ﬁrmware. Check http://www.hp.com for updates.

54	Managing the 4Gb SAN Switch

Image 54

Contents AA-RWEBB-TE Page Contents Managing the 4Gb SAN Switch Regulatory compliance and safetyPost Electrostatic discharge SAN Switch technical speciﬁcationsHow to prevent electrostatic discharge Grounding methods Glossary IndexFigures Tables Page Intended audience SAN Switch related documentationAbout this guide HP c-Class BladeSystem related documentationBefore you contact HP Technical Support HP contact informationDocument conventions and symbols Document conventionsConvention Element Subscription service Other HP web sitesTIP Overview 4Gb SAN Switch features Identify the physical components of the 4Gb SAN Switch Component identiﬁcationInternal ports summary Item number Description4Gb SAN Switch redundancy 4Gb SAN Switch licensing Supported optional features ISL trunking groupsAccessory Part number Optional hardware kitsOptional hardware Setup Shipping carton contentsInstallation and safety considerations Installing multiple switchesIdentiﬁes 4Gb SAN switch components Electrical considerations Environmental considerationsInstall the 4Gb SAN Switch Scale 2/3 = OA veriﬁes power Verifying power-on LEDs Power-on LEDs Checking LEDsSetting the IP address Using Enclosure Bay IP Addressing EbipaUsing External Dhcp Setting the IP address manuallyConnect interconnect Conﬁgure the 4Gb SAN Switch Items required for conﬁgurationConnecting to the Command Line Interface Setting the date and time Verifying installed licenses ExampleModifying the FC domain ID optional Enter a unique domain ID. For exampleDisabling and enabling a switch Disabling and enabling a portUsing Dynamic Ports On Demand Dpod Dpod commandsExample for Brocade 4/12 SAN Switch Verifying the conﬁguration Backing up the conﬁguration40Setup Managing the 4Gb SAN Switch Management features4Gb SAN Switch management features Management tool Out-of-band support In-band supportConnecting via a management station Maintaining the 4Gb SAN SwitchInstalling dust covers in empty ports Replacing an SFP transceiverDiagnostic tests Installing an SFP SFP componentsPowering on and off Interpreting LED activityLED indicators Description LED indicators NumberModule status LED patterns System and power LED patterns are shown in TableLED patterns Module Status LED patterns during normal operationPort link status LED patterns Port link status LED patternsPost and boot speciﬁcations BootPort link speed LED patterns Interpreting Post results Firmware update About the reset button Rebooting the switchReplacing a faulty 4Gb SAN Switch Save the conﬁguration ﬁle Regulatory compliance and safety Regulatory complianceRegulatory compliance identiﬁcation numbers Laser deviceInternational notices and statements Canadian notice avis CanadienEuropean Union notice Bsmi noticeJapanese notice Korean notices Safety Battery replacement noticeTaiwan battery recycling notice Power cordsJapanese power cord statement Waste Electrical and Electronic Equipment directive English noticeDutch notice Czechoslovakian notice Estonian noticeFinnish notice French noticeGerman notice Greek noticeHungarian notice Italian noticeLatvian notice Lithuanian noticePolish notice Portuguese noticeSlovakian notice Slovenian noticeSpanish notice Swedish noticeGrounding methods How to prevent electrostatic dischargeElectrostatic discharge This appendix provides the following informationElectrostatic discharge SAN Switch technical speciﬁcations General speciﬁcations General speciﬁcationsSpeciﬁcation Description Dimension Measurement Weight and physical dimensions4Gb SAN Switch physical dimensions Lists physical propertiesSupported HBAs Environmental requirementsSupported SFPs Environmental requirementsAPI GlossaryAlpa AwtovCRC DLSEdtov Fcia FCPFlogi FRU FSPFspf LIP LmtovLpsm LWL MIBPlogi RatovRscn RAIDRrtov SANSWL WWN86Glossary Trunking groups IndexISL LEDTransceiver, 14, 16, 31, 44, 47