HP Brocade 4Gb SAN c-Class BladeSystem Environmental requirements, Supported SFPs, Supported HBAs

Page 76

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 17 list the acceptable environment for both operating and non-operating conditions.

Table 17 Environmental requirements

Condition

Acceptable range during operation

Acceptable range during

 

 

non-operation

 

 

 

Ambient

104°F/40 °C at sea level, derated 1 C

-40°C to 70°C with maximum rate of

temperature

per 1000 ft above sea level

change of 20 C /hr

Humidity

5% to 90% relative humidity,

50% to 80% relative humidity,

 

non-condensing

non-condensing

 

 

 

Altitude

0 to 10,000 ft (3 km) above sea level

0 to 40,000 ft (12 km) above sea level

 

 

 

Shock

40 G, 2mS duration

140 G, 2mS,

 

 

 

Vibration

0.5 G, 10–500 Hz

2.0 G, 5–500 Hz

 

 

 

Airflow

47 cubic ft/minute

None required

 

 

 

Supported SFPs

Do not use unsupported SFPs; they can affect switch operability. They may not fit correctly and may void your warranty. See Optional hardware kits for a list of supported SFPs.

For a complete list of supported devices, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/ storageworks/san/documentation.html.

Supported HBAs

For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/storageworks/san/documentation.html.

76

SAN Switch technical specifications

Image 76
Contents AA-RWEBB-TE Page Contents Regulatory compliance and safety Managing the 4Gb SAN SwitchPost SAN Switch technical specifications How to prevent electrostatic discharge Grounding methodsElectrostatic discharge Glossary IndexFigures Tables Page SAN Switch related documentation About this guideIntended audience HP c-Class BladeSystem related documentationBefore you contact HP Technical Support HP contact informationDocument conventions Document conventions and symbolsConvention Element Other HP web sites Subscription serviceTIP Overview 4Gb SAN Switch features Identify the physical components of the 4Gb SAN Switch Component identificationInternal ports summary Item number Description4Gb SAN Switch redundancy 4Gb SAN Switch licensing Supported optional features ISL trunking groupsOptional hardware kits Accessory Part numberOptional hardware Setup Shipping carton contentsInstalling multiple switches Installation and safety considerationsIdentifies 4Gb SAN switch components Electrical considerations Environmental considerationsInstall the 4Gb SAN Switch Scale 2/3 = OA verifies power Verifying power-on LEDs Power-on LEDs Checking LEDsSetting the IP address Using Enclosure Bay IP Addressing EbipaUsing External Dhcp Setting the IP address manuallyConnect interconnect Configure the 4Gb SAN Switch Items required for configurationConnecting to the Command Line Interface Setting the date and time Verifying installed licenses ExampleModifying the FC domain ID optional Enter a unique domain ID. For exampleDisabling and enabling a switch Disabling and enabling a portUsing Dynamic Ports On Demand Dpod Dpod commandsExample for Brocade 4/12 SAN Switch Verifying the configuration Backing up the configuration40Setup Managing the 4Gb SAN Switch Management features4Gb SAN Switch management features Management tool Out-of-band support In-band supportMaintaining the 4Gb SAN Switch Installing dust covers in empty portsConnecting via a management station Replacing an SFP transceiverDiagnostic tests Installing an SFP SFP componentsPowering on and off Interpreting LED activityLED indicators Description LED indicators NumberSystem and power LED patterns are shown in Table LED patternsModule status LED patterns Module Status LED patterns during normal operationPort link status LED patterns Port link status LED patternsBoot Post and boot specificationsPort link speed LED patterns Interpreting Post results Firmware update About the reset button Rebooting the switchReplacing a faulty 4Gb SAN Switch Save the configuration file Regulatory compliance and safety Regulatory complianceRegulatory compliance identification numbers Laser deviceInternational notices and statements Canadian notice avis CanadienEuropean Union notice Bsmi noticeJapanese notice Korean notices Safety Battery replacement noticePower cords Taiwan battery recycling noticeJapanese power cord statement English notice Waste Electrical and Electronic Equipment directiveDutch notice Czechoslovakian notice Estonian noticeFinnish notice French noticeGerman notice Greek noticeHungarian notice Italian noticeLatvian notice Lithuanian noticePolish notice Portuguese noticeSlovakian notice Slovenian noticeSpanish notice Swedish noticeHow to prevent electrostatic discharge Electrostatic dischargeGrounding methods This appendix provides the following informationElectrostatic discharge SAN Switch technical specifications General specifications General specificationsSpecification Description Weight and physical dimensions 4Gb SAN Switch physical dimensionsDimension Measurement Lists physical propertiesEnvironmental requirements Supported SFPsSupported HBAs Environmental requirementsGlossary AlpaAPI AwtovDLS CRCEdtov FCP FciaFlogi FSP FRUFspf Lmtov LIPLpsm LWL MIBPlogi RatovRAID RrtovRscn SANSWL WWN86Glossary Index ISLTrunking groups LEDTransceiver, 14, 16, 31, 44, 47