HP Brocade 4Gb SAN c-Class BladeSystem manual Connect interconnect

Page 30

6.Configure the terminal application as follows: In a Windows environment, type:

Bits per second — 9600

Databits — 8

Parity — None

Stop bits — 1

Flow control — None

In a UNIX environment, type: tip /dev/ttyb –9600

7.Log into the OA.

8.Press Enter to display the switch console.

9.Identify the interconnect bay number where the switch is installed. At the OA command line, type:

connect interconnect x

Where x is the interconnect bay slot where the switch is installed.

a.User: admin

b.Password: password

NOTE:

Type entries as shown, as commands are case sensitive.

10.Or, follow the onscreen prompts to change your password now.

11. The OA will then connect its serial line to the Switch in the specified interconnect bay. A prompt displays indicating that the escape character for returning to the OA is Ctrl __ (underscore).

12.At the command line, type: ipaddrset.

13.Enter the remaining IP addressing information, as prompted.

14.Optionally, enter ipaddrshow at the command prompt to verify that the IP address is set correctly.

15.Record the IP addressing information and store in a safe place.

16.Type Exit and press Enter to log out of the serial console.

17.Disconnect the serial cable. For additional assistance with operating the Onboard Administrator CLI, refer to the Onboard Administrator Command Line Interface user guide for your specific enclosure, available at http://www.hp.com.

30Setup

Image 30
Contents AA-RWEBB-TE Page Contents Managing the 4Gb SAN Switch Regulatory compliance and safetyPost Electrostatic discharge SAN Switch technical specificationsHow to prevent electrostatic discharge Grounding methods Glossary IndexFigures Tables Page Intended audience SAN Switch related documentationAbout this guide HP c-Class BladeSystem related documentationBefore you contact HP Technical Support HP contact informationDocument conventions and symbols Document conventionsConvention Element Subscription service Other HP web sitesTIP Overview 4Gb SAN Switch features Identify the physical components of the 4Gb SAN Switch Component identificationInternal ports summary Item number Description4Gb SAN Switch redundancy 4Gb SAN Switch licensing Supported optional features ISL trunking groupsAccessory Part number Optional hardware kitsOptional hardware Setup Shipping carton contentsInstallation and safety considerations Installing multiple switchesIdentifies 4Gb SAN switch components Electrical considerations Environmental considerationsInstall the 4Gb SAN Switch Scale 2/3 = OA verifies power Verifying power-on LEDs Power-on LEDs Checking LEDsSetting the IP address Using Enclosure Bay IP Addressing EbipaUsing External Dhcp Setting the IP address manuallyConnect interconnect Configure the 4Gb SAN Switch Items required for configurationConnecting to the Command Line Interface Setting the date and time Verifying installed licenses ExampleModifying the FC domain ID optional Enter a unique domain ID. For exampleDisabling and enabling a switch Disabling and enabling a portUsing Dynamic Ports On Demand Dpod Dpod commandsExample for Brocade 4/12 SAN Switch Verifying the configuration Backing up the configuration40Setup Managing the 4Gb SAN Switch Management features4Gb SAN Switch management features Management tool Out-of-band support In-band supportConnecting via a management station Maintaining the 4Gb SAN SwitchInstalling dust covers in empty ports Replacing an SFP transceiverDiagnostic tests Installing an SFP SFP componentsPowering on and off Interpreting LED activityLED indicators Description LED indicators NumberModule status LED patterns System and power LED patterns are shown in TableLED patterns Module Status LED patterns during normal operationPort link status LED patterns Port link status LED patternsPost and boot specifications BootPort link speed LED patterns Interpreting Post results Firmware update About the reset button Rebooting the switchReplacing a faulty 4Gb SAN Switch Save the configuration file Regulatory compliance and safety Regulatory complianceRegulatory compliance identification numbers Laser deviceInternational notices and statements Canadian notice avis CanadienEuropean Union notice Bsmi noticeJapanese notice Korean notices Safety Battery replacement noticeTaiwan battery recycling notice Power cordsJapanese power cord statement Waste Electrical and Electronic Equipment directive English noticeDutch notice Czechoslovakian notice Estonian noticeFinnish notice French noticeGerman notice Greek noticeHungarian notice Italian noticeLatvian notice Lithuanian noticePolish notice Portuguese noticeSlovakian notice Slovenian noticeSpanish notice Swedish noticeGrounding methods How to prevent electrostatic dischargeElectrostatic discharge This appendix provides the following informationElectrostatic discharge SAN Switch technical specifications General specifications General specificationsSpecification Description Dimension Measurement Weight and physical dimensions4Gb SAN Switch physical dimensions Lists physical propertiesSupported HBAs Environmental requirementsSupported SFPs Environmental requirementsAPI GlossaryAlpa AwtovCRC DLSEdtov Fcia FCPFlogi FRU FSPFspf LIP LmtovLpsm LWL MIBPlogi RatovRscn RAIDRrtov SANSWL WWN86Glossary Trunking groups IndexISL LEDTransceiver, 14, 16, 31, 44, 47