HP 2250, 2200 manual Setting Up Your Printer on a Macintosh Computer

7.Select Client Setup if the printer is connected to a server or someone's machine. Select Server or Peer-to-Peer Setup if you are setting up a print server for the first time, or if you will print directly to HP JetDirect EIO print server installed in your printer. If you are not sure how to connect your network printer, ask your network administrator, or see the next section, Network Printing for more information.

Setting Up Your Printer on a Macintosh Computer

Connect your printer to a Macintosh computer via an HP JetDirect print server.

Before connecting your printer to the JetDirect server, make sure your printer is an:

•HP Business Inkjet 2250 printer with an HP JetDirect card, or

•HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit upgrade and an HP JetDirect card.

These cards can be purchased as accessories (see HP Supplies and Accessories for more information).

1.Connect the Ethernet cable to the printer and the JetDirect server.

2.Print the configuration page to determine the AppleTalk printer name. For instructions of printing a configuration page, see page 7-1.

3.Insert the Starter CD into the CD-ROM drive. Double-click the Installer icon located in the INSTALLER\<language> folder of the Starter CD, where <language> is your language preference.

For example, the INSTALLER\ENU folder contains the Installer icon for the English driver. For a list of languages and their abbreviations, see the page 4-5.

4.Follow the instructions on the screen to complete the installation.

5.Double-click the Desktop Printer Utility icon in the

APPLE EXTRAS\APPLE LASERWRITER SOFTWARE folder of the hard drive.

6.Select LaserWriter8, followed by Printer (AppleTalk) and click OK.

3-4