![](/images/new-backgrounds/1213347/21334795x1.webp)
Aligning the Printheads
The printheads are automatically aligned upon installation. If your printouts look like the printheads are misaligned, you can align them through the control panel.
1.Press the Menu button until MAINTENANCE MENU appears.
2.Press the Item button until ALIGN PRINTHEADS appears.
3.Press the Resume button.
4.The printer prints a page with alignment patterns.
Printing a Sample Page
Print a sample page without being connected to a computer. This allows you to see that your printer is set up correctly.
1.Press the Menu button until INFORMATION MENU appears.
2.Press the Item button until PRINT DEMO appears.
3.Press the Resume button to print the sample page.
Paper is Jammed in the Printer
If paper is jammed in the printer, follow these instructions to clear the jam.
Note: Information on Tray 2 is only applicable if your printer comes with Tray 2 or if you have purchased Tray 2 as an accessory.
1.Remove all paper from the Output Tray.
2.Open the top access door to locate the paper jam.