3.Press the Item button repeatedly until PRINT CONFIGURATION PAGE appears.
4.Press the Resume button to print the configuration page.
Note: Because you have installed an HP JetDirect card, two configuration pages will print. The JetDirect Configuration Page contains setup information (for example, LAN HW ADDRESS) that may be needed for the next step.
Step 3 – Install the Printer Software
1.Install the PCL5 and PS printer driver from the Starter CD. For more information on using the Starter CD to install printer drivers, see page
Sharing the Printer on a Network
Note: This procedure is for enabling a PC to use a shared printer. It assumes that the printer driver is already installed on the PC and that the printer is currently being shared on a network.
In this configuration, the printer is connected directly to the parallel port of a selected computer (or server) on the network and is shared by the other computers (or clients). The server could be a computer running Windows for Workgroups 3.11, Windows 95, Windows 98, or Windows NT 4.0/2000. Sharing the printer in this configuration is easy.
Use this configuration only in small groups or when usage is low. The shared computer is slowed down when many users print to its shared printer.