HP 2250, 2200 manual Color

Message	Explanation	Solution
REPLACE	The printer detects a	Reinstall the faulty ink
[COLOR]	faulty ink printhead.	printhead and try to print.
PRINTHEAD		Make sure the shipping tape
		has been removed. If the
		error persists, remove the
		printhead and use a dry, lint-
		free, soft cloth to gently clean
		any ink off the contact pads.
		Reinstall the printhead and try
		to print. If the error persists,
		replace the printhead.
[COLOR]	The printer cannot	Open the ink printhead door
PRINTHEAD	detect the ink printhead	and check if the printhead is
MISSING	because it is missing,	missing, improperly installed,
	improperly installed, or	or the wrong printhead. If
	defective.	none of these solutions work,
		replace the printhead. If the
		error persists, call HP.
BAD INK	The printer detects a	Follow the instructions in the
CARTRIDGE OR	faulty ink cartridge or	printer message.
PRINTHEAD	printhead.
LOAD [TRAY]	Printer requires media	Follow the instructions in the
WITH [MEDIA	of a specific type and	printer message.
TYPE] [MEDIA	size to be loaded in
SIZE]	specified paper tray.
PRINTED PAGE IS	Printer is letting the	Remove the wet page and
DRYING... PRESS	current page dry.	press the Resume button to
RESUME TO		continue printing.
CONTINUE
PERSONALITY	The printer cannot	Reinstall the personality card
CARD NOT	detect the card because	or replace it. If the error
RECOGNIZED	it is missing, improperly	message persists, call HP.
	installed, or defective.
RESET JETDIRECT	Prompts user to reset the	From the RESET Menu, press
CARD	internal parameters of	the Value Button to select EIO
	the JetDirect card.	RESET.
CLOSE ALL	The printer will not print	Follow the instructions in the
COVERS	until all access covers	printer message.
	are properly closed.
OUT OF	The printer is out of	Cancel the current print job,
MEMORY	memory and cannot	and add additional memory,
	print the current job.	or reduce the complexity of
		the document you are trying
		to print.

6-6