Message | Value | Description | |
|
|
| |
IPX/SPX | ON | Selects whether or not a protocol is | |
DLC/LLC | OFF | enabled or disabled. Change it to OFF | |
to disable a protocol. | |||
TCP/IP |
| ||
|
| ||
ETALK |
|
| |
|
|
| |
CFG IPX/SPX | NO | Selects whether you want to access the | |
| YES | IPX/SPX menu and set the IPX/SPX | |
| protocol parameters. | ||
|
| ||
|
| In the IPX/SPX menu, you can specify | |
|
| the Frame Type parameter used on your | |
|
| network. | |
|
| • The default is AUTO, which | |
|
| automatically sets and limits the Frame | |
|
| type to the one detected. | |
|
| • For Ethernet cards, frame type | |
|
| selections include EN_8023, EN_II, | |
|
| EN_8022, EN_SNAP. | |
|
| • For Token Ring cards, frame type | |
|
| selections include TR_8022, TR_SNAP. | |
|
| In the IPX/SPX menu for Token Ring | |
|
| cards, you can also specify NetWare | |
|
| Source Routing parameters, which | |
|
| include SRC RT=AUTO (default), OFF, | |
|
| SINGLE R or ALL RT. | |
|
|
| |
CFG TCP/IP | NO | Selects whether you want to access the | |
| YES | TCP/IP menu and set the TCP/IP | |
| protocol parameters. | ||
|
| ||
|
| In the TCP/IP menu, you can specify | |
|
| BOOTP=YES for TCP/IP parameters to | |
|
| be automatically configured by a BootP | |
|
| or DHCP server when the printer is | |
|
| turned on. | |
|
| If you specify BOOTP=NO, you can | |
|
| manually set the following TCP/IP | |
|
| parameters from the control panel: | |
|
| Each byte of the IP address (IP) | |
|
| • Subnet Mask (SM) | |
|
| • Syslog Server (LG) | |
|
| • Default Gateway (GW) | |
|
| • Idle Timeout period (default is 90 | |
|
| seconds, 0 disables the timeout) | |
|
| When setting IP numbers, press the | |
|
| Value button to increase the number by | |
|
| 1. Hold down the Value button to | |
|
| increase the number by 10. 2. Press the | |
|
| Resume button to make your selection. | |
|
|
|