11.Remove the two screws that secure WLAN module to the system board (2).
12.Lift the module up to a 45 degree angle, and then remove it from the slot at an angle. To install the WLAN module, reverse the removal procedures.
WLAN modules include a notch that prevents incorrect installation.
TV tuner module
1.Prepare the computer for disassembly (see Preparing to disassemble the HP TouchSmart PC on page 11).
2.Place the computer face down on a soft, flat surface.
3.Remove the hard drive/memory cover (see Hard drive/memory cover on page 12).
4.Remove the stand (see Stand on page 15).
5.Remove the I/O cover (see I/O cover on page 13).
6.Remove the feet (see Feet on page 14).
7.Remove the back cover (see Back cover on page 20).
26 Chapter 4 Removal and Replacement Procedures