7.Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other damage.
8.Using the notch on the wireless keyboard and mouse receiver, pull the receiver out of and away from the back of the computer.
WARNING! Beware of sharp edges inside the chassis.
To upgrade your hard disk drive, see Removing the hard drive on page 19.
Hard drive/memory cover
1.Prepare the computer for disassembly (see Preparing to disassemble the HP TouchSmart PC on page 11).
2.Place the computer face down on a soft, flat surface.
3.Lift the stand and pull up on the stand flip cover.
12 Chapter 4 Removal and Replacement Procedures