HP 4250 manual

A print server appliance test page has been queued to the (queue) printer queue.

Attempts to print to the printer failed.

Cannot be contacted

Changes have been made to the print queue. Please apply these changes before printing a test page.

Connected

Disabled

Door open

Driver name not found.

Error-Printer unknown

Insufficient disk space to write file name.

Invalid Queue Name. Max length is %(len)s, disallowed characters are: %(disallowed)s

Invalid Printer Address

The printer address must be an IP address or a hostname. IP address must be in the format xxx.xxx. xxx.xxx. Hostnames must be alphanumeric with no spaces. Dashes (-) and periods (.) are acceptable.

Invalid Print Share Description

Printer descriptions can contain alphanumeric characters, spaces, dashes (-), underscores (_), plus signs (+), commas (,), and periods (.).

Invalid print share name

Print Share names may only contain alphanumeric characters, underscores ( _ ), dashes ( - ), periods ( . ), and question marks ( ? ).

Low paper

Low toner

LPD Not Supported

No paper

Confirmation message after was pressed.

A configuration (test) page was requested but LPR was not able to print the job on the selected printer. The disk space might be full, or the printer might be off or offline.

The printer cannot be found. It does not respond to a network query or ping.

An attempt was made to print a test page before applying the changes made on the print share's Properties page.

Confirmation message.
Informational message.
Informational message.
That driver was not found. Choose another driver or
reinstall this driver.
The status of this printer is unknown. Click	to
update the status.

Internal Error. Try reducing the number of print queues.

Retype the queue name.

Printer addresses use the same format as IP addresses or hostnames. Retype the printer address using the appropriate format.

For IP addresses: x.x.x.x where the first number is between 1 and 255 and the other three numbers are between 0 and 255.

For hostnames, use only alphanumeric characters with no spaces. Dashes ( - ) and periods ( . ) are acceptable.

The Print Share Description field is optional. If desired, retype the description.

Retype the printer name.

Informational message.

Informational message.

The LPD protocol is not supported on this printer, and therefore it cannot be used with a PSA.

Informational message.