Installation
Verifying the Installation
To verify the HBA is properly installed and is operating:
1.Turn on the computer.
2.At power up, observe the POST LED indicators on the HBA. The position of
the POST LED indicators is defined in page 15 on page 15, and Table 2 on page 22 of this guide. The green LED indicates power functions and the amber LED signifies port activity. The amber LED blinks at all times during normal operation.
Table 3 lists normal LED indications.
Table 3: Normal POST LED Indicators
Amber LED (L1) | Green LED (L2) | State |
Off | Off | |
|
|
|
On | Off | POST failure (dead board) |
|
|
|
Slow blink (1 Hz) | Off | |
|
|
|
Fast blink (4 Hz) | Off | Failure in POST (dead board) |
|
|
|
Flashing (irregular) | Off | POST processing in progress |
|
|
|
Off | On | Failure while functioning |
|
|
|
On | On | Failure while functioning |
|
|
|
Slow blink (1 Hz) | On | |
|
|
|
Fast blink (4 Hz) | On | |
|
|
|
Off | Blink (1 Hz) | |
|
| started |
|
|
|
22 | AB232A |