Troubleshooting
POST Conditions and Results
Table 4 lists the HBA LED states with descriptions of each.The position of the POST LED indicators is defined in Figure 1 on page 15, and Table 3 on page 22 of this guide.
If the LEDs indicate a failure during POST:
1.Make sure that the HBA is seated firmly in the PCI slot.
2.Verify that the fiber cable connection to the HBA is secure.
Table 4: Normal POST LED Indicators
Amber LED (L1) | Green LED (L2) | State |
Off | Off | |
|
|
|
On | Off | POST failure (dead board) |
|
|
|
Slow blink (1 Hz) | Off | |
|
|
|
Fast blink (4 Hz) | Off | Failure in POST (dead board) |
|
|
|
Flashing (irregular) | Off | POST processing in progress |
|
|
|
Off | On | Failure while functioning |
|
|
|
On | On | Failure while functioning |
|
|
|
Slow blink (1 Hz) | On | |
|
|
|
Fast blink (4 Hz) | On | |
|
|
|
Off | Blink (1 Hz) | |
|
| started |
|
|
|
30 | AB232A |