HP FCA2404 AB232A AB232A manual Windows Miniport Event Log Codes, Snsrsp Rcvseq

Troubleshooting

Windows Miniport Event Log Codes

The Windows Miniport driver logs events and errors in the Windows Event log. Serious errors are always logged. Informational events are only logged if the registry parameter LogError=1 is used.

All Miniport logged events are issued with an Event ID of 11 (INTERNAL ADAPTER ERROR) but do not necessarily indicate an HBA error occurred. Byte offset 0x10 of the event is the driver event code. Byte offsets 0x11 to 0x13 contain event-specific information.

Table 5 describes the SCSI port error log codes.

Table 5: SCSI Port Error Log Codes

0x10
Offset	Explanation	0x11 to 0x13 Further Information
0xD0	SNS_REQ (XMIT_SEQ	0x11	= cmdstat, 12 = parm err
	failed)
0xD1	SNS_RSP (RCV_SEQ	0x11	= cmdstat, 12 = parm err
	failed)
0xD3	RCV_ELS_REQ failed	0x11	= cmdstat, 12 = parm err
0xD4	XMT_ELS_REQ failed	0x11	= cmdstat, 12 = parm err
0xD5	Too many targets found	0x11 to 13 = D_DID that didn’t fit
	(160+)
0xD6	SNS request time-out	0x11 to 13 = no additional information
0xD7	Mailbox interrupt time-out	0x11	= mailbox word 0
0xD8	TPRLO requested when	0x11	= local req. state, 12 =
	busy	discstate, 13 = mailbox word 0
0xD9	Link down time-out	0x11	= local req. state, 12 =
	occurred	discstate, 13 = mailbox word 0
0xDA	Hard link down time-out	0x11	= local req. state, 12 =
	occurred	discstate, 13 = mailbox word 0
0xE1	Error interrupt occurred	Status register bytes 1–3 in event
		11–13. E1 error indicates an HBA
		hardware failure, return HBA for
		repair.
0xE2	Mailbox cmd time-out	0x11	= command

32 AB232A PCI-X Host Bus Adapter Installation Guide