HP FCA2404 AB232A AB232A manual Device Driver Installation, System Requirements

Installing the SCSI Miniport Driver

Device Driver Installation

This section describes the instructions for installing the Windows SCSI Miniport driver.

System Requirements

Ensure that your system meets these minimum requirements:

■Installed HBA

■StorageWorks Fibre Channel Storage subsystem (interconnect device and storage device)

Installing or Upgrading a New Driver

The AB232A HBA is a plug-and-play device that is detected by Windows operating systems. Perform the following steps to add or update the Windows driver to a previously installed Windows system:

1.Install the HBA as described in Chapter 2 on page 17.

2.Restart or turn on the computer.

3.Browse to the the driver kit on the Smart Setup CD-ROM (or one you downloaded from the website if it is more recent).

4.Double-click cp00xxxx.exe.

Note: Refer to the following website for the information about this Smart Component’s final version number: http://h18000.www1.hp.com/storage/saninfrastructure.html.

5.Follow the installation wizard instructions.

6.When the installation completes, you must reboot.

7.Repeat step 1 through step 6 for any additional HBAs. Make sure to reboot after installing the driver for the last HBA.

26 AB232A PCI-X Host Bus Adapter Installation Guide