HP FCA2404 AB232A AB232A manual Pt-Pt

			Troubleshooting
Table 5: SCSI Port Error Log Codes (Continued)
0x10
Offset	Explanation	0x11 to 0x13 Further Information
0xE3	Mailbox rsp err	0x11	= command, 12–13 =
		mbxstatus
0xE4	HBA not ready after init	Status register bytes 1–3 in event
		11–13
0xE5	Requested loop but link =
	PT–PT
0xE6	Mailbox int. but cmd not	0x11	= MB cmd, 12–13 = mbxstatus
	complete
0xE7	SRB already queued to ring
0xE8	RESTART failed
0xE9	PORT BYPASS (LPB)
	received
0xEB	Unknown IOCB cmd rsp	0x11	= 15:8 = cmd field
0xEC	Uncached extension alloc.
	error
0xED	Link down @ boot time
	(30 sec)
0xEF	Too many interrupts at
	initial boot
0xF1	LinkUp error; LP8 down,	0x11	= parameter field, 12 = IOCB
	driver up	cmd
0xF2	LinkUp w/ illegal or corrupt	0x11	= parameter field, 12 = IOCB
	RPI	cmd
0xF3	DeQueue	0x11	= caller ID
	ring->iotcmd.head
0xF4	HBA reset	0x11	= coded reason for reset:
		Bit 0 = IOCB requeue; bit 1 = readla
		retry
		Bit 2 = initlink retry; bit 3 = rstbus retry
		Bit 4 = mailbox time-out
0xF5	PCP_IXXX_CR IOCB rsp	0x11	= cmdstat, 12 = parm err, 13 =
	err	ALPA

AB232A PCI-X Host Bus Adapter Installation Guide 33