HP ZT1100 manual Removing Notebook Components, Additional Steps

Removing Notebook Components

(HP Authorized Service Providers Only)

Required Equipment

•#0 Phillips screwdriver.

•Small flat-blade screwdriver.

Removal Procedure

1.Unplug the AC adapter, if present, and remove the battery.

2.Remove the assemblies and follow the additional steps given in the table below.

Table 2-5. Removing Notebook Components

Component

Antenna, Bluetooth

Antenna, wireless

Bezel, display

Card, mini-PCI

Case, bottom

Case, top

Cover, keyboard

Display assembly

Doors, docking

Removal Procedure

See page 2-20.

See page 2-20.

See page 2-20.

See page 2-16.

See page 2-32.

See page 2-27.

See page 2-9.

See page 2-18.

Plug-in module (page 2-5). Hard disk drive (page 2-6).

Keyboard cover (page 2-9).

Keyboard (page 2-11).

SDRAM modules (page 2-13).

Mini-PCI card (page 2-16).

Display assembly (page 2-18).

Fan and heatsink (page 2-22).

CPU module (page 2-25). Top case (page 2-27).

Hinge saddles (page 2-30).

Motherboard (page 2-32).

Additional Steps

See Figure 2-24 on page 2-35.

HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-37