HP book XE2 manual SMBus Tests

Page 57

0603h

For the external loop-back test, make sure the

 

loop-back connector is installed and

 

constructed properly. For the external or

 

internal loop-back test, replace the

 

motherboard.

0604h -

Replace the motherboard.

0605h

 

0606h

For the external loop-back test, make sure the

 

loop-back connector is installed and

 

constructed properly. For the external or

 

internal loop-back test, replace the

 

motherboard.

0607h

Make sure the loop-back connector is installed

 

and constructed properly. Replace the

 

motherboard.

0608h -

Replace the motherboard.

0617h

 

Parallel Port Tests

0701h

For the external loop-back test, make sure the

 

loop-back connector is installed and

 

constructed properly. For the external or

 

internal loop-back test, replace the

 

motherboard.

0702h

Replace the motherboard.

0703h

Run BIOS Setup and disable ECP for the

 

parallel port, then rerun the test. Replace the

 

motherboard.

0704h -

Replace the motherboard.

0706h

 

0707h

Connect the loop-back connector.

0708h

Replace the motherboard.

Audio Tests

0801h -

If this error also occurs for an external

0816h

headphone, replace the motherboard (or VGA

 

PCA for the OB 4150). Otherwise, check the

 

speaker connections, replace the speakers. If it

 

occurs only for an external headphone, replace

 

the audio jack PCA.

9003h -

(See Microphone Tests near end of table.)

9004h

 

Video Tests

0900h -

Replace the VGA PCA.

0901h

 

0903h -

Replace the LVDS PCA. Replace the VGA

0906h

PCA.

0907h -

Replace the VGA PCA.

0908h

 

0909h -

Replace the LVDS PCA. Replace the VGA

090Ah

PCA.

090Ch -

Replace the VGA PCA.

090Fh

 

0920h

Replace the LVDS PCA. Replace the VGA

 

PCA.

8000h

(See LCD Test near end of table.)

CD-ROM Tests

0A00h

Insert a CD in the drive.

0A01h

Rerun the test. Replace the CD-ROM drive.

0A02h

No repair. (Automatic close not supported.)

0A03h

Insert a different CD in the drive. Check the

 

connectors on the CD-ROM drive and

 

motherboard. Replace the CD-ROM drive.

0A04h

Insert a computer CD in the drive.

0A05h

Insert a different CD in the drive. Check the

 

connectors on the CD-ROM drive and

 

motherboard. Replace the CD-ROM drive.

0A06h

Insert an audio CD in the drive.

SMBus Tests

0E00h - Replace the motherboard. 0E10h

ATAPI Removable Tests (LS-120)

0F02h -

Rerun the test. Insert a different disk in the LS-

0F03h

120 drive. Check the connectors on the LS-120

 

drive and motherboard. Replace the LS-120

 

drive.

0F04h - Replace the LS-120 drive. 0F05h

TI CardBus Tests

1201h

Memory space not available. Remove any

 

attached ISA or PCI cards.

1202h -

Replace the motherboard.

1203h

 

1205h -

Insert a different PC Card. Replace the

1206h

PCMCIA socket. Replace the motherboard.

USB Tests

1301h

Reprogram the BIOS IC. Replace the BIOS IC.

 

Replace the motherboard.

1302h -

Replace the motherboard.

1312h

 

9006h

(See USB Port Test near end of table.)

LCD Test

 

8000h

If the test fails with an external monitor (must

 

support VESA mode 105h), replace the VGA

 

PCA, replace the motherboard. Otherwise:

 

- If the shaded-band test fails, check the LCD

 

flex cable connection in the bottom case,

 

replace the LVDS PCA, replace the LCD flex

 

cable, replace the VGA PCA, replace the

 

motherboard.

 

- If only a solid-color test fails, see chapter 5 for

 

cosmetic guidelines, replace the LCD module.

Microphone/Line-In Tests

9003h

If the error occurs for built-in and external

 

microphones, replace the motherboard (or VGA

 

PCA for the OB 4150). If it occurs for only the

 

built-in microphone, check the LCD flex cable

 

connection, replace the inverter PCA. If it

 

occurs only for an external microphone, replace

 

the audio jack PCA.

9004h

Replace the audio jack PCA. Replace the

 

motherboard (or VGA PCA for the OB 4150).

Suspend/Resume Test

9005h

Run BIOS Setup and restore default settings.

 

Reprogram the BIOS IC. Replace the BIOS IC.

 

Replace the motherboard.

USB Port Test

9006h

Make sure a USB device is connected to the

 

port you are testing. Select the correct speed

 

for the device. Replace the motherboard (or

 

dock component, if applicable).

HP OmniBook XE2

Troubleshooting and Diagnostics 3-15

Image 57
Contents Page Edition History Contents Tables FiguresHP OmniBook XE2 Sources of OmniBook Information IntroductionSource Address or NumberOmniBook XE2 OmniBook Front View Features and OperationOmniBook Bottom View OmniBook Status Lights Turning the OmniBook On and OffActivating Power Modes Status Lights LED PCA Checking the Status of the OmniBookResetting the OmniBook Using Fn Hot KeysFn Hot Keys Hot KeySystem Interrupts System ResourcesSystem Memory 00000 9FFFF A0000 Bffff C0000 Cffff D0000 DbfffDMA Channels System Input/Output Addresses 100-3FFOmniBook XE2 Specifications SpecificationsSoftware Security Features Environmental Limits Major ICs Internal Design Replaceable Module DiagramDocking port 10. Functional StructurePage Removal Cross-Reference Recommended Screw Torques Screw Thread SizeTorque kgfcm Torque lbfin Removing the Battery Removal ProcedureRequired Equipment Removing a RAM Board RAM Board Replacement Part NumbersDescription Product NumberReleasing the RAM Module Latches Reassembly Notes Removing the Hard Disk Drive Hard Disk Drive Replacement Part NumberPart Number Exchange Part NumberReplacing Small Parts Replacement ProcedureReplacing Small Parts User-Replaceable Part Feet RAM Module CoverRemoving the Fan HP Authorized Service Providers OnlyRemoving the Keyboard Cover and Screws Removing the KeyboardInstalling the Keyboard Reassembly Notes Removing the Display Assembly Reassembly Notes Removing the Display AssemblyRemoving the LCD Module Removing the LCD Module Reassembly Notes Removing the Top Case Removing the Top Case10. Detaching the Bottom Case Technology Code DD Removing the CPU and Motherboard11. Removing the CPU and Motherboard Storing the Serial Number Electronically Installing a New Serial Number Label Removing Display Components Removing Other ComponentsRemoving Top Case Components Removing Bottom Case ComponentsLED PCA Modem PCA Motherboard RAM Board Removal ProceduresHP OmniBook XE2 Troubleshooting and Diagnostics Troubleshooting the Problem TroubleshootingVerifying the Repair Scope of Diagnostic Tools Suggestions for TroubleshootingPower-On DMI/TopTools Self-Test If installed Bios SetupTroubleshooting Suggestions SymptomStartup Call Center Suggestions Power/BatteryRepair Center Likely Causes Repair Center CommentsTouch pad Floppy drive Call Center SuggestionsSerial/Parallel Miscellaneous Accessories Diagnostic Tools OmniBook Diagnostic ProgramCreating a Diagnostic Floppy Disk Enter Running the Diagnostic TestCode Suggestions System Tests OmniBook Diagnostic Error CodesHard Disk Tests SMBus Tests IR Tests FIR enabled, undocked Power-On Self-TestPost Messages Post Terminal-Error Beep CodesBeep Codes Post Description02B0 Diskette drive a error 02B1 Diskette drive B error Message Description Press F1 to resume, F2 to Setup, F3 for previousUninstalling the DMI Package Installing the DMI PackageUsing the DMI Interface Desktop Management Interface DMIContents of the DMI Package Bios Setup Utility Running the Bios Setup UtilityBios Setup Menus and Parameters Security Menu Power APM MenuExit Menu Boot MenuPage Exploded View Except Display Components Exploded View Display Components Exploded View Motherboard Components HP Exchange Part Number OmniBook XE Replaceable Parts HP Part NumberDescription Technology CodeLCD CVR, ADI 12 TFT LCD CVR, CPT 14 TFT DC/DD PCA, NO-MODEM Layer Accessory Replaceable Parts Order From Cover, Label ProtectQuanta Part Number Order From Quanta Description Part Number Order From Quanta Part Number Reference LCD BKT, CPT 14 TFT DC/DD/DE DOOR, RAM Quanta Part NumberLCD CVR, CPT 14 TFT LCD Bezel Password Removal Policy Hewlett-Packard Display Quality Statement OmniBook XE LCD Guidelines TFTImperfections Not Allowed Type of Imperfection Mechanical Imperfections Details OmniBook XE Technology CodesPart Number P F1753-90004