Hibernate Timeout
Hard Disk Timeout
Video Timeout
Power Button Mode
Resume on Modem Ring
Resume on Time
Resume Time
Cooling Control
Boot Menu
Removable Devices
Hard Drive
ATAPI
Exit Menu
Exit Saving Changes
Exit Discarding
Changes
Load Setup Defaults
Discard Changes
Save Changes
power mode.
Sets whether the computer goes from Suspend to Hibernate power mode after the indicated period of inactivity.
Sets the period of inactivity after which the hard disk stops spinning.
Sets the period of hard disk inactivity after which the screen is turned off.
Sets the action (Suspend or Off) of the blue power button when pressed for less than 4 seconds.
Sets whether the system resumes from Suspend if a ring signal is received.
Sets whether the system resumes from Suspend at a defined time of day.
Sets the
Sets mode for reduction of CPU temperature to Silence (less cooling) or Performance (more cooling).
Shows the order of boot devices. Move the entries to change the order. Removable Devices include the floppy disk drive.
Saves Setup changes to CMOS, exits, and reboots.
Discards Setup changes since last save, exits, and reboots. Does not affect security, date, or time changes.
Restores default settings, stays in Setup. Does not affect security, date, or time changes.
Discards Setup changes since last save, stays in Setup. Does not affect security, date, or time changes.
Saves Setup changes to CMOS and stays in Setup. Security settings are saved when changed.
2 hours
1minute
Off
Suspend
Off
Off
Performance
Default
1.Removable Devices
2.Hard Drive
3.ATAPI
HP OmniBook XE2 |