Technical Guide

LX SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER – R-410A – 1 PHASE 1.5 THRU 5 NOMINAL TONS

MODELS: YHJD18 THRU 60

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.york.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY SUMMARY*

Standard 5-Years limited parts warranty. Standard 10-Years limited compressor warranty.

Extended 10-Years limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction.

*Does not apply to R-22 models, 3-Phase models, or internet sales. See Limited Warranty certificate in User's Information Manual for details.

571209-YTG-C-1012

DESCRIPTION

The 13 SEER Series unit is the outdoor part of a versatile cli- mate system. It i76s designed with a matching indoor coil com- ponent from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with acces- sories and documents to serve specific functions.

FEATURES

•Small Footprint - The compact footprint is a perfect fit for any application.

•Quality Condenser Coils - The coil is constructed of copper tubing and enhanced aluminum fins for increased perfor- mance.

•Coil Protection - Coils are protected from damage by a slot- ted, stamped steel coil guard.

•Protected Compressor - Compressors are protected inter- nally by a high pressure relief valve and a temperature sen- sor, and externally by the system high pressure switch. A factory installed liquid line filter-drier further protects the com- pressor against moisture and debris.

•Environmentally Friendly Refrigerant - The next genera- tion refrigerant R-410A delivers environmentally friendly per- formance with zero ozone depletion.

•Durable Finish - The cabinet is made of G90-equivalent pre- painted steel, with special primer formulas and matte cham- pagne texture to insure less fading when exposed to sun- light. The coated steel wire fan guard and pre-treated, galvanized steel chassis components resist corrosion and rust creep.

•Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. The unit is factory charged for a 15-foot lineset. The small base dimension means less space is required on the ground or roof.

•Top Discharge - Warm air from the top mounted fan is blown up, away from the structure and any landscaping. This allows compact location on multi-unit applications.

•Low Operating Sound Level - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the condenser coil muffle the nor- mal fan motor and compressor operating sounds.

•Low Maintenance - Long life, permanently lubricated motor- bearings need no annual servicing.

•Easy Service Access - Fully exposed refrigerant connec- tions and a single panel covering the electrical controls make for easy servicing of the unit.

•Secured Service Valves - Secured, re-usable service valves are provided on both the liquid and vapor sweat con- nections for ease of evacuating and charging.

•Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE