Connect another Video Out
To temporarily change Video Out such as HDMI or VGA video (any output other than component video):
1Turn off the TV/display.
2Turn off the HP Digital Entertainment Center by pressing and holding the On/Standby power button for 4 seconds. The On/Standby button should be dark and not lit amber or blue.
3Disconnect the component video cable from the HP Digital Entertainment Center
4Connect another Video Out, such as HDMI or VGA video cables to the HP Digital Entertainment Center
NOTE: If your TV/display can accept HDMI or VGA video, connect HDMI or VGA video, for a
5Turn on the TV/display.
6Switch the TV/display input to the HDMI or VGA video input.
7Turn on the HP Digital Entertainment Center by pressing the On/Standby power button. a Wait 1 to 2 minutes. The video image reappears.
b Do not restart your HP Digital Entertainment Center.
26HP Digital Entertainment Center TV/Display Setup Guide