TECHNICAL GUIDE
HEAT PUMPS
14.5 SEER –
MODELS: YHJF18 THRU 60
(1.5 THRU 5 NOMINAL TONS, 1
PHASE)
LISTED
Due to continuous product improvement, specifications are subject to change without notice.
Visit us on the web at www.york.com Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard
Extended
DESCRIPTION
The 14.5 SEER Series unit is the outdoor part of a versatile cli- mate system. It is designed with a matching indoor coil compo- nent from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with acces- sories and documents to serve specific functions.
FEATURES
•Quality Condenser Coils - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection.
•Protected Compressor - The complete scroll compressor line is internally protected against high pressure, tempera- ture, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line
•Durable Finish - The cabinet is made of
•Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.
•Top Discharge - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on
•Swept Fan Blade Sound Jacket - The upward air flow car- ries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Iso- lator mounted compressor and the rippled fins of the con- denser coil muffle the normal fan motor and compressor operating sounds. The swept wing fan blade and compressor sound jacket futher reduce noise levels.
•Low Maintenance - Long life permanently lubricated motor- bearings need no annual servicing.
•Easy Service Access - Fully exposed refrigerant connec- tions, and a single panel covering the electrical controls make for easy servicing of the unit.
•Secured Service Valves - Secured
•U.L. and C.U.L. listed - approved for outdoor application.
•Agency Listed - U.L. and C.U.L. listed - approved for out- door application. The unit is certified in accordance with the Unitary Small Equipment cerification program, which is based on ARI Standard 210/240.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE