Inverter Board
Description | Spare part number |
|
|
Inverter board |
|
|
|
The inverter board is located on the left side of the computer under the rear cover. It is secured with two screws and has three connectors.
To remove the inverter board:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Remove the small rear cover (see Small Rear Cover on page 28).
3.Remove the stand (see Stand on page 29).
4.Remove the right rear cover (see Right Rear Cover on page 35).
5.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
6.Remove the rear cover (see Rear Cover on page 46).
7.Disconnect the three cables from the board (1).
NOTE: Be careful not to damage the cables when disconnecting them from the board. Do not pull on the wires.
48 Chapter 7 Removal and Replacement Procedures