HP Pro 110 manual 1st Drive, 2nd Drive, System Information

Table 3-1Computer Setup—Main (continued)

1st Drive	For each, allows you to set:
2nd Drive	●	Port Configuration - enable/disable (default is enabled)
		Capacity (Size - HDD only; view only)
		Transfer mode (view only)
	● Smart Support - run HDD self-test for selected channel:
		◦	SMART Status Check
		◦	SMART Short Self-Test
		◦	SMART Extended Self-Test
System Information	(view only)
	●	Installed Memory
	●	Memory Bank 1
	●	Memory Bank 2
	●	BIOS Revision
	●	Core Version

8 Chapter 3 Computer Setup (F10) Utility