HP Pro 110 manual Operating Guidelines, Recommended Materials and Equipment

Page 25

Recommended Materials and Equipment

Materials and equipment that are recommended for use in preventing static electricity include:

Antistatic tape

Antistatic smocks, aprons, or sleeve protectors

Conductive bins and other assembly or soldering aids

Conductive foam

Conductive tabletop workstations with ground cord of one-megohm +/- 10% resistance

Static-dissipative table or floor mats with hard tie to ground

Field service kits

Static awareness labels

Wrist straps and footwear straps providing one-megohm +/- 10% resistance

Material handling packages

Conductive plastic bags

Conductive plastic tubes

Conductive tote boxes

Opaque shielding bags

Transparent metallized shielding bags

Transparent shielding tubes

Operating Guidelines

To prevent overheating and to help prolong the life of the computer:

Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.

Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides of the computer and above the monitor to permit the required airflow.

Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow.

Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter can block the vents and limit the airflow. Be sure to unplug the computer before cleaning the air vents.

Never operate the computer with the cover removed.

Do not place computers so near each other that they are subject to each other’s re-circulated or preheated air.

Keep liquids away from the computer and keyboard.

Operating Guidelines 17

Image 25
Contents Maintenance & Service Guide Maintenance & Service Guide About This Book Iv About This Book Table of contents Illustrated parts catalog USB Viii Product Features Component Front ComponentsRear and Side Components Installing the Operating System Installing and Customizing the SoftwareDownloading Microsoft Windows Updates Protecting the Software Installing or Upgrading Device Drivers Windows systemsComputer Setup F10 Utilities Computer Setup F10 UtilityUsing Computer Setup F10 Utilities Computer Setup-Main 2nd Drive 1st DriveSystem Information Computer Setup-Power Computer Setup-AdvancedComputer Setup-Boot Computer Setup-Exit Recovering the Configuration SettingsSerial ATA Hard Drive Characteristics Serial ATA Sata Drive Guidelines and FeaturesSata Hard Drives Sata Hard Drive CablesHard Drive Capacities Smart ATA DrivesAll-in One Chassis DesignationGenerating Static Electrostatic Discharge InformationPreventing Electrostatic Damage to Equipment Relative Humidity Event 55% 40% 10%Grounding the Work Area Personal Grounding Methods and EquipmentStatic Shielding Protection Levels Method VoltageRecommended Materials and Equipment Operating GuidelinesCleaning the Computer Case General Cleaning Safety PrecautionsCleaning the Keyboard Routine CareCleaning the Monitor Service ConsiderationsCleaning the Mouse Tools and Software RequirementsLithium Coin Cell Battery Cables and ConnectorsScrews Hard DrivesService Considerations Computer major components Illustrated parts catalogPower button/LED cable Power button boardFront bezel kit FanSequential part number listing Mass storage devicesSequential part number listing Illustrated parts catalog Preparing to Disassemble the Computer Removal and Replacement Procedures All-in One AIO ChassisSmall Rear Cover Stand Left Rear Cover 4Removing the optical drive Optical Drive Optical DrivePage 6Removing the hard drive Hard Drive Hard DrivePage Right Rear Cover Memory Page Heat Sink Thermal Module 12Removing the heat sink Remove the heat sink see Heat Sink Thermal Module on ProcessorPage Wlan Module Page Description Spare part number Webcam module 651586-001 Webcam ModulePage Rear Cover Page Description Spare part number Inverter board 651601-001 Inverter BoardPage Description Spare part number Power button board 651585-001 Power Button BoardSystem Board Shield Description Spare part number Fan 651606-001 FanPage Speakers Page System Board Page Stand Bracket 29Removing the drive connectors Drive Connectors Drive ConnectorsDescription Spare part number Front bezel kit 704214-001 Front BezelPage Page Display Panel Page Post Error Messages Post Numeric Codes and Text Messages ROM Download to Disable toControl panel message Description Recommended action Device Options NIC PXE OptionPost Numeric Codes and Text Messages Test under Storage DPS Self-test Post Numeric Codes and Text Messages Bios Post Numeric Codes and Text Messages Options SERR# Generation Disable Table A-2Diagnostic Front Panel LEDs and Audible Codes Activity Beeps Possible Cause Recommended Action Board needs to be replaced Resetting the Cmos Jumper Page Connector and Icon Pin Signal Connector Pin AssignmentsConnector and Icon 1/8 miniphone Pin Signal Ethernet BNCLine-in Audio HeadphoneLine-out Audio Japanese Power Cord Requirements Power Cord Set RequirementsGeneral Requirements Country Accrediting Agency Country-Specific RequirementsAll-in One Models SpecificationsCmos IndexSata
Related manuals
Manual 2 pages 22.55 Kb