HP Pro 110 manual Post Numeric Codes and Text Messages

Page 79

Table A-1Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

 

 

 

 

2220-USB Key Provisioning file has

Provisioning file contained on the USB key

1.

Reboot the computer.

mismatch version

is not a valid version for the current ME

2.

If the error persists and system BIOS

 

firmware.

 

 

 

has been recently updated, restore

 

 

 

previous system BIOS version.

 

 

 

Otherwise, update the ME firmware

 

 

 

version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2230-General error during MEBx execution

Error occurred during MEBx execution

1.

Reboot the computer.

 

which fails into the “General” grouping.

2.

If the error persists, update to the latest

 

Status information displayed along with the

 

error provides further clarity into the failure.

 

BIOS version and ME firmware

 

MEBx handles transference of information

 

version.

 

between the system BIOS and ME

3.

If the error still persists, replace the

 

firmware.

 

 

 

system board.

 

 

 

 

2231-ME error during MEBx execution

Error occurred during MEBx execution

1.

Reboot the computer.

 

which fails into “ME” grouping.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version and ME firmware

 

 

 

version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2232-AMT error during MEBx execution

Error occurred during MEBx execution

1.

Reboot the computer.

 

which fails into “AMT” grouping.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version and ME firmware

 

 

 

version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

 

2233-HECI error during MEBx execution

Error occurred during MEBx execution

1.

Reboot the computer.

 

which fails into “MEI or HECI” grouping.

2.

If the error persists, update to the latest

 

 

 

 

 

BIOS version and ME firmware

 

 

 

version.

 

 

3.

If the error still persists, replace the

 

 

 

system board.

 

 

 

Invalid Electronic Serial Number

Electronic serial number is missing.

Enter the correct serial number in Computer

 

 

Setup.

 

 

 

 

POST Numeric Codes and Text Messages 71

Page 78 Page 80
Image 79
Page 78 Page 80
Contents Maintenance & Service Guide Maintenance & Service Guide About This Book Iv About This Book Table of contents Illustrated parts catalog USB Viii Product Features Component Front ComponentsRear and Side Components Installing the Operating System Installing and Customizing the SoftwareDownloading Microsoft Windows Updates Protecting the Software Installing or Upgrading Device Drivers Windows systemsComputer Setup F10 Utilities Computer Setup F10 UtilityUsing Computer Setup F10 Utilities Computer Setup-Main 2nd Drive 1st DriveSystem Information Computer Setup-Power Computer Setup-AdvancedComputer Setup-Boot Computer Setup-Exit Recovering the Configuration SettingsSata Hard Drive Cables Serial ATA Sata Drive Guidelines and FeaturesSerial ATA Hard Drive Characteristics Sata Hard DrivesHard Drive Capacities Smart ATA DrivesAll-in One Chassis DesignationRelative Humidity Event 55% 40% 10% Electrostatic Discharge InformationGenerating Static Preventing Electrostatic Damage to EquipmentMethod Voltage Personal Grounding Methods and EquipmentGrounding the Work Area Static Shielding Protection LevelsRecommended Materials and Equipment Operating GuidelinesRoutine Care General Cleaning Safety PrecautionsCleaning the Computer Case Cleaning the KeyboardTools and Software Requirements Service ConsiderationsCleaning the Monitor Cleaning the MouseHard Drives Cables and ConnectorsLithium Coin Cell Battery ScrewsService Considerations Computer major components Illustrated parts catalogFan Power button boardPower button/LED cable Front bezel kitSequential part number listing Mass storage devicesSequential part number listing Illustrated parts catalog Preparing to Disassemble the Computer Removal and Replacement Procedures All-in One AIO ChassisSmall Rear Cover Stand Left Rear Cover 4Removing the optical drive Optical Drive Optical DrivePage 6Removing the hard drive Hard Drive Hard DrivePage Right Rear Cover Memory Page Heat Sink Thermal Module 12Removing the heat sink Remove the heat sink see Heat Sink Thermal Module on ProcessorPage Wlan Module Page Description Spare part number Webcam module 651586-001 Webcam ModulePage Rear Cover Page Description Spare part number Inverter board 651601-001 Inverter BoardPage Description Spare part number Power button board 651585-001 Power Button BoardSystem Board Shield Description Spare part number Fan 651606-001 FanPage Speakers Page System Board Page Stand Bracket 29Removing the drive connectors Drive Connectors Drive ConnectorsDescription Spare part number Front bezel kit 704214-001 Front BezelPage Page Display Panel Page Post Error Messages Device Options NIC PXE Option ROM Download to Disable toPost Numeric Codes and Text Messages Control panel message Description Recommended actionPost Numeric Codes and Text Messages Test under Storage DPS Self-test Post Numeric Codes and Text Messages Bios Post Numeric Codes and Text Messages Options SERR# Generation Disable Table A-2Diagnostic Front Panel LEDs and Audible Codes Activity Beeps Possible Cause Recommended Action Board needs to be replaced Resetting the Cmos Jumper Page Ethernet BNC Connector Pin AssignmentsConnector and Icon Pin Signal Connector and Icon 1/8 miniphone Pin SignalLine-in Audio HeadphoneLine-out Audio Japanese Power Cord Requirements Power Cord Set RequirementsGeneral Requirements Country Accrediting Agency Country-Specific RequirementsAll-in One Models SpecificationsCmos IndexSata
Related manuals
Manual 2 pages 22.55 Kb
Top Page Image Contents