Stand Bracket
The stand bracket is secured with four screws. Removing it allows access to the fans, heat sink, processor, and optional TV tuner.
To remove the stand bracket:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 27).
2.Remove the small rear cover (see Small Rear Cover on page 28).
3.Remove the stand (see Stand on page 29).
4.Remove the right rear cover (see Right Rear Cover on page 35).
5.Remove the heat sink (see Heat Sink (Thermal Module) on page 38).
6.Remove the rear cover (see Rear Cover on page 46).
7.Remove the four screws (1) that secure the bracket to the computer.
8.Lift the bracket from the computer (2). Figure
To replace the stand bracket, reverse the removal procedures.
58 Chapter 7 Removal and Replacement Procedures