HP Pro 4300 manual DPS Self-Test, Shortcut to Temporarily Override Boot Order

Table 3-3Computer Setup—Storage (continued)

DPS Self-Test	Allows you to execute self-tests on ATA hard drives capable of performing the Drive Protection
	System (DPS) self-tests.
	NOTE: This selection will only appear when at least one drive capable of performing the DPS
	self-tests is attached to the system.
Boot Order	Allows you to:
	● EFI Boot Sources: Specify the order in which EFI boot sources (such as a internal hard
	drive, USB hard drive, USB optical drive, or internal optical drive) are checked for a bootable
	operating system image. Each device on the list may be individually excluded from or
	included for consideration as a bootable operating system source.
	EFI boot sources always have precedence over legacy boot sources.
	● Legacy Boot Sources: Specify the order in which legacy boot sources (such as a network
	interface card, internal hard drive, USB optical drive, or internal optical drive) are checked for
	a bootable operating system image. Each device on the list may be individually excluded
	from or included for consideration as a bootable operating system source.
	Specify the order of attached hard drives. The first hard drive in the order will have priority in
	the boot sequence and will be recognized as drive C (if any devices are attached).
	NOTE: To drag a device to a preferred place, press Enter. To remove the device from
	consideration as a bootable device, press F5.
	You can use F5 to disable individual boot items, as well as disable EFI boot and/or legacy boot.
	NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
	system has started.
	Shortcut to Temporarily Override Boot Order
	To boot one time from a device other than the default device specified in Boot Order, restart the
	computer and press Esc (to access the boot menu) and then F9 (Boot Order), or only F9 (skipping
	the boot menu) when the monitor light turns green. After POST is completed, a list of bootable
	devices is displayed. Use the arrow keys to select the preferred bootable device and press Enter.
	The computer then boots from the selected non-default device for this one time.

Computer Setup (F10) Utilities 15