HP A165890669 manual Cstm verify all Return

Page 50

2.To verify the system operation, type the following at the CSTM> prompt:

CSTM> verify all RETURN

Messages that are similar to the following appear:

Verification has started on device (CPU).

Verification has started on device (FPU).

Verification has started on device (0/0/0).

Verification has started on device (2/0/1.5.0).

Verification has started on device (2/0/1.6.0).

Verification has started on device (2/0/2).

CSTM>Message from (0/0/0):

This graphics test displays a number of graphics images on the screen of

the graphics device being tested. If an X server is not currently running on that display, X Windows will be started and run for the duration of the test. The Starbase shared library (/usr/lib/libsb.sl) should be present to run this test.

CAUTION: This test will fail if any portion of the test window is modified or overlaid in any way.

NOTE: If a VUE login screen is currently displayed on the monitor, the test

will wait until someone logs in the HP VUE on the graphics monitor to release the lock. The test stops if the Screen Saver times out, it runs again once the Screen is activated.

WARNING: Do not run this exerciser with any other operation.

(Type 'R' for Ready, Type 'S' for Skip) [R] >>

3±10

Image 50

Contents HP 4x Speed CD±ROM Disk Drive Users Guide 10 9 8 7 6 5 4 3 2 Contents Using your CD±ROM Drive Maintenance and TroubleshootingAppendix a Safety and Regulatory Statements Appendix B Scsi Connector PinoutFigures Safety and Regulatory Statements AudienceInstallation Notice Related ManualsEdition Problems, Questions, and SuggestionsRevision History E0895 First PrintingDocumentation Conventions Literal valuesChapter General Description ±1. HP 4x Speed CD±ROM DriveMajor Features of the CD±ROM Drive Altitude TemperatureCD±ROM Drive Environmental Requirements HumidityCD±ROM Drive Physical Specifications ±2. HP 4x Speed CD±ROM Physical SpecificationsTools Required Preparing to Install the CD±ROM DriveVerifying Kit Contents Minimum RequirementsSet the SCSI±2 Address Address Jumpers ±3. SCSI±2 Address Settings Usr/sbin/ioscan ±d sdisk Return Prepare the SystemEtc/ioscan ±d scsi Return Ioscan No hardware found # /etc/shutdown ±h Return Single-Ended SCSI-2 Bus Configuration Constraints Maximum Number of SCSI-2 Devices per bus Single-Ended SCSI-2 DevicesType of Device Allowed SCSI-2 Bus Termination Guidelines Power Off the Workstation and any Peripherals Using Your CD±ROM Drive Device Your CD±ROM Drive ConfigurationScsi ID and Device File Information for HP±UX Controls and Features of the CD±ROM Drive ±1. CD±ROM Drive Controls and FeaturesControl/Feature Purpose Using the CD±ROM Drive Media DescriptionDisc Tray Description ±2. CD±ROM Disc TrayLoading a CD±ROM Disc in a Horizontally Mounted Drive Unloading a CD±ROM Disc in a Horizontally Mounted Drive Loading a CD±ROM Disc in a Vertically Mounted Drive ±5. Inserting a CD±ROM Disc Vertical MountUnloading a CD±ROM Disc in a Vertically Mounted Drive ±10±11 Mounting a CD±ROM DiscMkdir /cdrom Return ±12 Unmounting a CD±ROM DiscCd /cdrom Return ±13 Reading the Busy Light ±14Maintenance and Troubleshooting Caring for the CD±ROM Discs Etc/ioscan Return TroubleshootingCheck the Address Settings for Single±Ended Drives Screen similar to the following appears Usr/sbin/ioscan ±d sdisk Return Check the Hardware Installation Recheck the Address Settings Verify the System Operation using SupportWave # man cstm Return # man mstm Return # man xstm ReturnFollowing screen appears Cstm verify all Return When you see the prompt shown above, type the following Removing and Replacing the CD±ROM Drive Removal and Replacement ProceduresField Replaceable Units Description Part Number CD±ROM Drive A4325±60001Appendix a Canadian Department of Communications CDC Emissions RegulationsFederal Communications Commission FCC Regulation On Noise Declaration For Machines ±3. Gsgv Emissions Regulations ComplianceAcoustics Electrostatic Discharge ESD Precautions Laser Safety Statement For U.S.A. Only Laserturvallisuus Loukan 1 Laserlaite Klass 1 Laser ApparatIEC 825 Class Laser Labels Warnung Appendix B Order Number A1658±90669 Edition E0895