HP A165890669 manual When you see the prompt shown above, type the following

Page 51

3.When you see the >> prompt shown above, type the following:

R RETURN

The following messages and a graphics test window appear:

Verification of (2/0/1.5.0) has completed. Result status ± (Success). Verification of (2/0/1.6.0) has completed. Result status ± (Success). Verification of (CPU) has completed. Result status ± (Success).

Verification of (FPU) has completed. Result status ± (Success). Verification of (2/0/2) has completed. Result status ± (Success). Verification of (0/0/0) has completed. Result status ± (Success).

4. To return the CSTM> prompt, press RETURN .

5.To exit the Support Tools Manager, enter the following:

CSTM> exit RETURN

If any tests failed, further diagnosis is necessary by qualified service personnel.

3±11

Image 51
Contents HP 4x Speed CD±ROM Disk Drive Users Guide 10 9 8 7 6 5 4 3 2 Contents Maintenance and Troubleshooting Using your CD±ROM DriveAppendix B Scsi Connector Pinout Appendix a Safety and Regulatory StatementsFigures Audience Safety and Regulatory StatementsRelated Manuals Installation NoticeE0895 First Printing Problems, Questions, and SuggestionsRevision History EditionLiteral values Documentation ConventionsChapter ±1. HP 4x Speed CD±ROM Drive General DescriptionMajor Features of the CD±ROM Drive Humidity TemperatureCD±ROM Drive Environmental Requirements Altitude±2. HP 4x Speed CD±ROM Physical Specifications CD±ROM Drive Physical SpecificationsMinimum Requirements Preparing to Install the CD±ROM DriveVerifying Kit Contents Tools RequiredSet the SCSI±2 Address Address Jumpers ±3. SCSI±2 Address Settings Prepare the System Etc/ioscan ±d scsi ReturnUsr/sbin/ioscan ±d sdisk Return Ioscan No hardware found # /etc/shutdown ±h Return Single-Ended SCSI-2 Bus Configuration Constraints Single-Ended SCSI-2 Devices Type of Device AllowedMaximum Number of SCSI-2 Devices per bus SCSI-2 Bus Termination Guidelines Power Off the Workstation and any Peripherals Using Your CD±ROM Drive Your CD±ROM Drive Configuration Scsi ID and Device File Information for HP±UXDevice ±1. CD±ROM Drive Controls and Features Controls and Features of the CD±ROM DriveControl/Feature Purpose Media Description Using the CD±ROM Drive±2. CD±ROM Disc Tray Disc Tray DescriptionLoading a CD±ROM Disc in a Horizontally Mounted Drive Unloading a CD±ROM Disc in a Horizontally Mounted Drive ±5. Inserting a CD±ROM Disc Vertical Mount Loading a CD±ROM Disc in a Vertically Mounted Drive±10 Unloading a CD±ROM Disc in a Vertically Mounted DriveMounting a CD±ROM Disc Mkdir /cdrom Return±11 Unmounting a CD±ROM Disc Cd /cdrom Return±12 ±13 ±14 Reading the Busy LightMaintenance and Troubleshooting Caring for the CD±ROM Discs Troubleshooting Check the Address Settings for Single±Ended DrivesEtc/ioscan Return Screen similar to the following appears Usr/sbin/ioscan ±d sdisk Return Check the Hardware Installation Recheck the Address Settings # man cstm Return # man mstm Return # man xstm Return Verify the System Operation using SupportWaveFollowing screen appears Cstm verify all Return When you see the prompt shown above, type the following Description Part Number CD±ROM Drive A4325±60001 Removal and Replacement ProceduresField Replaceable Units Removing and Replacing the CD±ROM DriveAppendix a Emissions Regulations Federal Communications Commission FCCCanadian Department of Communications CDC Emissions Regulations Compliance AcousticsRegulation On Noise Declaration For Machines ±3. Gsgv Electrostatic Discharge ESD Precautions Laserturvallisuus Loukan 1 Laserlaite Klass 1 Laser Apparat Laser Safety Statement For U.S.A. OnlyIEC 825 Class Laser Labels Warnung Appendix B Order Number A1658±90669 Edition E0895