Wake Time
An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis. For example, the product can be set to wake up at 07:30, so the product has finished initializing and calibrating and is ready to use by 08:00. The administrator only sets one wakeup setting per day; however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay can be set to turn the product off after a specific period of inactivity.
1
2
3
Callout | Area on the screen | Information or capability that the area provides |
|
|
|
1 | EWS tabs and menus | For more information, see “Navigating through the HP Embedded |
| Web Server” on page 5. | |
|
| |
|
|
|
2 | Wake Time | Select one or more days on which to use the wakeup setting, and |
| then set the time the product is turned on each day. | |
|
| |
|
|
|
3 | Sleep Delay | Set the amount of time the product is idle before it goes into |
| Sleep Mode. When the product is in Sleep Mode, it uses less | |
|
| |
|
| energy. |
|
|
|
ENWW | Wake Time 37 |