13 Remove the packing tape from tray 4.
14Firmly grip the handle in the center of tray 4, squeeze the release lever, and pull the tray out until it stops.
15Remove the two orange packing clips from inside tray 4 by squeezing the sides of the clips and pulling them out.
CAUTION
Leaving the orange clips in tray 4 can damage the tray.
16 Close all doors and input trays.
By completing steps 1 through 16 above, all tape and spacers should be removed and unpacking of the printer should be complete.
EN | Step 2: Unpacking the Printer 9 |