HP 8000 s manual To connect a parallel cable

Page 19

To connect a parallel cable

To print through the parallel port, the printer requires a 25-pin male/micro

36-pin male (“C-size”) parallel cable that is IEEE-1284 compliant. The cable is not included with the printer. It must be purchased separately.

1Squeeze the clips on the micro 36-pin end of the parallel cable and plug it into the printer's parallel port. Release the clips.

2Plug the other end of the parallel cable into the computer. Tighten the screws on the parallel cable to secure the cable to the computer.

EN	Step 4: Connecting the Printer to the Network 15

Image 19

Contents 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer Page Getting Started Guide Copyright Information Contents Printer Information ConfigurationsHP Color LaserJet 8550MFP Preparing a Location for the Printer Unpacking the Printer To unpack the printer Page Page Page To connect the power cord to a printer with a stand Installing the CablesPage Page Page To connect to a 10Base-T or 100Base-TX network Connecting the Printer to the NetworkTo connect a parallel cable To replace the overlay To select the printer control panel language Selecting the Display LanguageInstalling the Consumables To install the imaging drum To install the black toner cartridge Page To install the color toner cartridges Page Page Loading the Input Trays Loading media into trays 2 some printer models only Page Page Loading media in the optional tray Page Tray 1 Auto Configuring Input TraysTo configure media type and size Configuring Media Type and SizeTo print a configuration Printing a ConfigurationTo verify communication with a parallel cable HP JetDirect 10/100TX print server Print Server Operation Jumper P1 Jumper P2 Jumper P3 Structure of the CD-ROMs Understanding the SoftwareInstalling the Software To access the online user guide from the hard disk Accessing the Online User GuideAdditional Information To access the online user guide from the CD-ROMRun Windows Network InstallationCD ROM Distributing the Printer Software to Network Clients Configuring the Printer on the NetworkCreating Disk Images with the Windows Installer Installing the Printer Software for Network ClientsConnecting Network Clients to the Printer Neighborhood to the Printers folder To connect workstations to the print serverClick Settings Click Printers Click Other printer driver IBM LAN Network InstallationSelect the HP Color LaserJet 8550 driver Installing the Macintosh Printer Software Macintosh Network InstallationTo install printer software for system 7.5 or later To connect to the printer automatically To configure the printer driver manuallyClick Select PPD Distributing the Printer Software to Network Clients Problem or Error Message Solution Troubleshooting ChecklistClear Paper JAM Page Troubleshooting Checklist Page Page C7096-90923

Related manuals

Manual 242 pages 18.56 Kb

Manual 56 pages 13.39 Kb

Manual 64 pages 48.49 Kb