HP 8000 s manual Click Select PPD

Page 56

4From the list of printer names along the right side of Chooser, select the name of the printer (even if it is the only one that appears).

5Click Setup.

6Click Select PPD.

7From the list of PPD files, click HP Color LaserJet 8550 Printer.

8Click Select.

9Click Configure.

10Enter the appropriate selections for the printers installed options and click OK.

11Click OK to complete the setup. An icon appears next to the name of the printer.

12Close Chooser.

Configuring the Printer on the Network

Configure the printer in one of two ways:

zPrint directly to the printer through EtherTalk.

zPrint through the network by printing to a print queue. Set up the print queue using the network software.

The HP LaserJet Utility allows printer settings such as printer name and preferred zone to be configured from the Macintosh system. HP recommends that only system administrators use the printer configuration capabilities of this utility.

If the printer is to be serviced by a print spooler, set up the printers name and zone before configuring the spooler to capture the printer.

52

EN

Image 56
Contents 8550, 8550N, 8550DN, 8550GN, 8550MFP Printer Page Getting Started Guide Copyright Information Contents Configurations Printer InformationHP Color LaserJet 8550MFP Preparing a Location for the Printer Unpacking the Printer To unpack the printer Page Page Page Installing the Cables To connect the power cord to a printer with a standPage Page Page Connecting the Printer to the Network To connect to a 10Base-T or 100Base-TX networkTo connect a parallel cable To replace the overlay Selecting the Display Language To select the printer control panel languageInstalling the Consumables To install the imaging drum To install the black toner cartridge Page To install the color toner cartridges Page Page Loading the Input Trays Loading media into trays 2 some printer models only Page Page Loading media in the optional tray Page Configuring Input Trays Tray 1 AutoConfiguring Media Type and Size To configure media type and sizePrinting a Configuration To print a configurationTo verify communication with a parallel cable HP JetDirect 10/100TX print server Print Server Operation Jumper P1 Jumper P2 Jumper P3 Understanding the Software Structure of the CD-ROMsInstalling the Software Accessing the Online User Guide To access the online user guide from the hard diskTo access the online user guide from the CD-ROM Additional InformationWindows Network Installation RunCD ROM Configuring the Printer on the Network Distributing the Printer Software to Network ClientsInstalling the Printer Software for Network Clients Creating Disk Images with the Windows InstallerConnecting Network Clients to the Printer To connect workstations to the print server Neighborhood to the Printers folderClick Settings Click Printers IBM LAN Network Installation Click Other printer driverSelect the HP Color LaserJet 8550 driver To install printer software for system 7.5 or later Macintosh Network InstallationInstalling the Macintosh Printer Software To configure the printer driver manually To connect to the printer automaticallyClick Select PPD Distributing the Printer Software to Network Clients Troubleshooting Checklist Problem or Error Message SolutionClear Paper JAM Page Troubleshooting Checklist Page Page C7096-90923
Related manuals
Manual 242 pages 18.56 Kb Manual 56 pages 13.39 Kb Manual 64 pages 48.49 Kb