HP 8000 s manual Selecting the Display Language, To select the printer control panel language

Selecting the Display Language

Use the printer control panel to set the printer to display printer messages and print configuration pages in a variety of supported languages.

To select the printer control panel language

Figure 3

	1	Hold down SELECT while turning the printer on (power button in).
		SELECT LANGUAGE (in English) appears on the printer control
		panel display for approximately one second. Once the printer has
		restarted, LANGUAGE = ENGLISH will appear on the display.
Note	Only -VALUE+, SELECT, and GO are active while the display language
	is being configured. All other keys are ignored.
	If you press GO without selecting a language, the printer will bring
	itself online and all subsequent messages will be displayed in
	English. However, since no display language was selected, the
	LANGUAGE = ENGLISH message will reappear (after the power-on self
	test) when the printer is next turned on. This message will be
	displayed every time the printer is turned on until you select a
	language through the configure language mode.
	2	Press -VALUE+until the language you want appears on the
		display.
	3	Press SELECT to save the selection.
		An asterisk (*) appears to the right of the selection. The language
		selected will be the default language until another selection is
		made by restarting the printer in the configure language mode.
	4	Press GO.
	5	Turn the printer off (power button out).

EN Step 5: Changing the Printer Control Panel Overlay and Language (Optional) 17